FP767-12 BenQ, FP767-12 Datasheet - Page 41

• Manufacturer Part Number: FP767-12
• Description: LCD Color Monitor
• Manufacturer: BenQ

www.DataSheet4U.com
1. Run the test program auto.exe from CD-ROM; this is the best way to observe possible changes.
2. Press “Enter” on control panel to access OSD.
3. If there is vertical noise observed, press
4. If there is horizontal noise observed, press
7
How to set the Picture Optimization
The easiest way to obtain an optimal display is to use the ikey function. Press the “ ikey ” on the
control panel and the monitor will adjust automatically.
If you are still not satisfied with the result, you can still adjust the image manually.
You can also use any other image, such as the desktop of your operating system. However, we rec-
ommend that you use auto.exe. As you run auto.exe, a test pattern emerges.
Then press
key. Then press
To make sure the “ iKey ” function performs well, you have to use one of the supported modes. If
the “ iKey ” does not work properly and the “NON PRESET MODE” message is on the OSD, it
means you are not using one of the supported modes. Please set your computer to use one of the
supported modes. You will find a list of supported modes in this manual.
key to adjust the monitor untill the noise disappears.
to adjust the monitor untill the noise disappears.
or
or
key to select “Pixel Clock” and also press “Enter” key again. Now, press
key to select “Phase” and also press “Enter” key again. Now, press
or
or
key to select “Geometry” and press “Enter” key.
key to select “Geometry” and press “Enter”
How to set the Picture Optimization
or
or
41