11166 Apem Components Ltd, 11166 Datasheet - Page 4

• Manufacturer Part Number: 11166
• Description: Professional Toggle Switches
• Manufacturer: Apem Components Ltd

B
B-56
• Max. current/voltage rating with resistive load :
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 m
• Insulation resistance : 1.000 M
• Dielectric strength :
• Contact bounce : 2 ms max.
• Electrical life at full load :
For peak current, refer to section G.
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin plated PC terminals available,
see "Special options".
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D : solid gold rivet
X910 : silver/nickel alloy (for
peak current, see section G)
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
Contacts
A
AD2
X780
D
MATERIALS
Max. current/voltage rating
2A 250VAC - 4A 125VAC - 4A 30VDC
2A 250VAC - 4A 125 VAC - 4A 30VDC
Under 100mA 30VDC without damaging
the gold plating
200mA 250VAC - 400mA 125VAC
Low level or mechanical life
11000 AND 12000 SERIES
max.
min. at 500VDC
PROFESSIONAL TOGGLE SWITCHES
• Torque :
• Standard panel thickness :
• Operating temperature : -40°C to +85°C
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
QPL (Europe only)
MUAHAG
Designed to MIL specifications (12000 only)
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format.
Preferential lists do not appear on the switches.
- 11000 = 1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts
- 12000 = 1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts
- 11000 = 2,5 mm (.098) max.
- 12000 = 4,5 mm (.177) max.
ELECTRICAL SPECIFICATIONS
Specifications
CECC 96201-005
CECC 96201-008
A P E M
AGENCY APPROVALS
RELIABILITY
GENERAL SPECIFICATIONS
2 positions
150.000
50.000
20.000
80.000
-
/
RUN
PREFERENTIAL LISTS
Number of cycles
-
IN TEST
3 positions
100.000
50.000
20.000
50.000