MX205Q ETC-unknow, MX205Q Datasheet - Page 8

• Manufacturer Part Number: MX205Q
• Description: Low Cost, 5.0g, Dual Axis Accelerometer With Analog Outputs
• Manufacturer: ETC-unknow

Printed Circuit Board Layout and
Filter Requirements
Layout Notes
1. Use robust low inductance ground
2. Liberal use of ceramic bypass
3. The capacitors should be located
4. The capacitor lead length should
wiring
capacitors
as close as possible to the device
supply pins (VDA, VDD).
be as short as possible. Surface
mount capacitors are preferred.
Filtering Notes
1. Low pass filter – 200Hz, -3db
2. Ceramic capacitors C
3. f = 1/2πRC
4. Resistor R 3 , R 4 – 1/8 Watt,
5. Reference Application Note
5% tolerance
# AN-00MX-004
3
, C
4
R 3 =
R 4 =
C 3 =
C 4 =
Data Sheet
Page 8 of 8
MX205Q
MX201Q ANALOG Data Sheet N 8/1/01
Information furnished by MEMSIC is believed to be
accurate and reliable. However, no responsibility is
assumed by MEMSIC for its use, nor for any infringe-
ments of patents or other rights of third parties which
may result from its use. No license is granted by
implications or otherwise under any patent or patent
rights of MEMSIC.
Technical information.
Subject to change without notice.
®MEMSIC, Inc. 2000.
100 Burtt Road, Andover, MA 01810
Tel: [phone]
www.memsic.com
•
Fax: [phone]