ASMT-MW03 Avago Technologies, ASMT-MW03 Datasheet - Page 11

• Manufacturer Part Number: ASMT-MW03
• Description: Moonstone? 1w Power Led Light Source
• Manufacturer: Avago Technologies

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is
a soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly of
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail infor-
mation.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per
Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of
the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for
details.
A. Storage before use
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved.
AV02-1673EN - April 22, 2009
– Unopen moisture barrier bag (MBB) can be stored at
– It is not recommended to open the MBB prior to
<40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the humidity indicator
card (HIC) indicates that baking is not required, then
it is safe to reflow the LEDs per the original MSL
rating.
assembly (e.g. for IQC).
DISCLAIMER: Avago’s products and software are not specifically designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear
facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make
claims against Avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
www.avagotech.com
B. Control after opening the MBB
C. Control for unfinished reel
D. Control of assembly boards
E. Baking is required if
Recommended baking condition: 60±5°C for 20hrs.
– The humidity indicator card (HIC) shall be read
– The LEDs must be kept at <30°C / 60%RH at all time
– For any unused LEDs, they need to be stored in
– If the PCB soldered with the LEDs is to be subjected to
– “60%” HIC indicator is NOT blue.
– The LEDs are exposed to condition of >30°C / 60%
– The LED floor life exceeded 672hrs.
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
sealed MBB with desiccant or desiccator at <5%RH.
other high temperature processes, the PCB need to
be stored in sealed MBB with desiccant or desiccator
at <5%RH to ensure no LEDs have exceeded their
floor life of 672 hours.
RH at any time.