ADT7468 Analog Devices, Inc., ADT7468 Datasheet - Page 70
![no-image](/images/no-image-200.jpg)
ADT7468
Manufacturer Part Number
ADT7468
Description
Dbcool Remote Thermal Controller And Voltage Monitor
Manufacturer
Analog Devices, Inc.
Datasheet
1.ADT7468.pdf
(84 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ADT7468ARQZ
Manufacturer:
ADI/亚德诺
Quantity:
20 000
ADT7468
Table 31. Temperature Limit Registers
Register Address
0x4E
0x4F
0x50
0x51
0x52
0x53
1
2
Table 32. Fan Tachometer Limit Registers
Register Address
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
1
Table 33. Register 0x55—TACH 1 Minimum High Byte (Power-On Default = 0xFF)
Bits
<4:0>
<7:5>
Exceeding any of these temperature limits by 1°C causes the appropriate status bit to be set in the interrupt status register. Setting the Configuration Register 1 lock
High Limits: An interrupt is generated when a value exceeds its high limit (> comparison). Low Limits: An interrupt is generated when a value is equal to or below its
Exceeding any of the TACH limit registers by 1 indicates that the fan is running too slowly or has stalled. The appropriate status bit is set in Interrupt Status Register 2
bit has no effect on these registers.
low limit (≤comparison).
to indicate the fan failure. Setting the Configuration Register 1 lock bit has no effect on these registers.
Name
Reserved
SCADC
R/W
Read only
Read/write
R/W
Read/write
Read/write
Read/write
Read/write
Read/write
Read/write
R/W
Read/write
Read/write
Read/write
Read/write
Read/write
Read/write
Read/write
Read/write
Description
These bits are reserved when Bit 6 of Configuration 2 Register (0x73) is set (single-channel ADC mode).
Otherwise, these bits represent Bits <4:0> of the TACH1 minimum high byte.
When Bit 6 of Config 2 Register (0x73) is set (single channel ADC mode), these bits are used to select the
only channel from which the ADC makes measurements. Otherwise, these bits represent Bits <7:5> of
the TACH1 minimum high byte.
1
1
Description
Remote 1 temperature low limit
Local temperature low limit
Local temperature high limit
Remote 2 temperature low limit
Description
TACH1 minimum low byte
TACH1 minimum high byte/Single channel ADC
channel select
TACH2 minimum low byte
TACH2 minimum high byte
TACH3 minimum low byte
TACH4 minimum low byte
Remote 1 temperature high limit
Remote 2 temperature high limit
TACH3 minimum high byte
TACH4 minimum high byte
Rev. A | Page 70 of 84
2
0x81
Power-On Default
0xFF
0xFF
0xFF
Power-On Default
0x81
0x7F
0x7F
0x81
0x7F
0xFF
0xFF
0xFF
0xFF
0xFF