D2SW-P Omron Corporation, D2SW-P Datasheet - Page 2

• Manufacturer Part Number: D2SW-P
• Description: Sealed Subminiature Basic Switch
• Manufacturer: Omron Corporation

Specifications
■ Ratings
Note: The ratings values apply under the following test conditions.
■ Characteristics
Note: 1. The data given above are initial values.
2
Model
D2SW-P2
D2SW-P01
Item
Operating speed
Operating frequency
Insulation resistance
Contact resistance (initial value)
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Durability (see note 4)
Degree of protection
Degree of protection against electric shock Class 1
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 20 operations/min.
2. The dielectric strength shown in the table indicates a value for models with a Separator.
3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values
4. Consult your OMRON sales representative for testing conditions.
5. The test to meet standards checks for water intrusion after immersion for 30 minutes. The test does not check for switching operation
apply at the total travel position. Contact opening or closing time is within 1ms.
underwater. Refer to “Degree of Protection” or “Instructions for Correct Use”.
Sealed Subminiature Basic Switch
Rated voltage
30 VDC
250 VAC
30 VDC
125 VAC
Model
D2SW-P2
0.1 mm to 500 mm/s (pin plunger models)
Mechanical: 120 operations/min max.
Electrical:
100 MΩ min. (at 500 VDC)
Terminal models: 50 mΩ max.
Molded lead wire models: 100 mΩ max.
1,000 VAC, 50/60 Hz for 1 min. between
terminals of the same polarities
1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 50,000 operations min.
(20 operations/min.)
IEC IP67 (see note 5)
(excluding the terminals on terminal models)
175
-20° C to 70° C (at ambient humidity of 60% max.) (with no icing)
85% max. (for 5° C to 35° C)
Approx. 2 g (pin plunger models with terminals)
Resistive load
2 A
0.1 A
D2SW-P
20 operations/min max.
2
{approx. 30 G} max.
2
{approx. 100 G} max.
D2SW-P01
Terminal models: 100 mΩ max.
Molded lead wire models: 150 mΩ max.
600 VAC, 50/60 Hz for 1 min. between
terminals of the same polarities
Mechanical: 1,000,000 operations min.
(60 operations/min.)
Electrical: 200,000 operations min.
(20 operations/min.)