PM5365 PMC-Sierra, Inc., PM5365 Datasheet - Page 28

• Manufacturer Part Number: PM5365
• Description: TEMUX/TEMAP/TECT3 T1/E1 FRAMER, VT/TU MAPPER, M12/M13 MUX DRIVER MANUAL
• Manufacturer: PMC-Sierra, Inc.

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1991611, Issue 2
Device Initialization Profile
The device initialization profile is used to initialize the TEMUX/TEMAP/TECT3 device to a
specific operating mode. It is used by the profile manipulation functions
(
Table 5: Device Initialization Profile: sTMX_INIT_PROF
lineopt
·
·
·
sysopt
temuxGetInitProfile,
Field Name
lineopt
sysopt
opmode
e1Mode
autoActivate
Field Name
usrCtxt
autoInit
profileNum
modeISR
cbackIO
cbackDS3
cbackFramer
cbackMapper
TMX_LINEOPT_LIU_DS3
TMX_LINEOPT_SDH_DS3
TMX_LINEOPT_SDH_E1T1
can be one of the following:
can be one of the following:
Field Type
void *
UINT2
UINT2
TMX_ISR_MODE
void *
void *
void *
void *
etc.) and
Field Type
UINT2
UINT2
UINT2
BOOLEAN
BOOLEAN
: DS3 Mux with DS3 SONET/SDH Mapper (Not valid in TECT3)
: DS3 Mux with serial LIU interface
: E1/T1 Mapper
TEMUX/TEMAP/TECT3 (PM8315, PM5365, PM4328) Driver Manual
temuxInit
Field Description
a user-supplied value that is returned in callback
functions
if non-zero,
profile number to be used for initialization. A profile
number of zero indicates that the driver should leave all
the device registers unchanged after reset
indicates the type of ISR/polling to do
address of the callback function for IO Events
address of the callback function for DS3 Events
address of the callback function for Framer Events
address of the callback function for Mapper Events (not
valid in TECT3)
. Important fields are given below.
Field Description
Line side configuration options
System side configuration options
Operation mode
Set device to E1 mode
Activates the device for operation
temuxInit
is called internally
Data Structures
28