NHSW046H Nichia, NHSW046H Datasheet - Page 6

• Manufacturer Part Number: NHSW046H
• Manufacturer: Nichia

Specifications of NHSW046H

• Size Lxwxh (mm): 2.2x1.4x1.3
• Lumi-nous Inten-sity Typ(cd): 35
• Forward Voltage Vf(v) Typ: 2.90
• Forward Voltage Vf(v) Max: 3.10
• Directivity (degree): 115
• If (ma): 5
• Mounting Style: Through Hole

SOLDERING
• Recommended Reflow Soldering Condition(Lead-free Solder)
● Recommended Soldering Pad Pattern
* This LED is designed to be reflow soldered or dip-soldered on to a PCB.
* Reflow soldering must not be performed more than twice. Dip soldering/hand soldering must not be performed more than once.
* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.
* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
* When soldering, do not apply stress to the LED while the LED is hot.
caused by heat and/or atmosphere.
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
1 to 5°C per sec
Blank boxes: Solder resist opening , Shaded areas: Footprint
Pre-heat
180 to 200°C
120sec Max
4
0.8
60sec Max
Above 220°C
9.2
0.8
4
260°C Max
10sec Max
(単位 Unit: mm)
• Recommended Hand Soldering Condition
• Recommended Dip Soldering Condition
Temperature
Soldering Time
Pre-heat
Pre-heat Time
Solder Bath
Temperature
Dipping Time
350°C Max
3sec Max
100°C Max
60sec Max
260°C Max
10sec Max
5