BTS 737 S3 Infineon Technologies, BTS 737 S3 Datasheet - Page 15

• Manufacturer Part Number: BTS 737 S3
• Manufacturer: Infineon Technologies

Specifications of BTS 737 S3

• Packages: P-DSO-28
• Channels: 4.0
• Ron @ Tj = 25°c: 35.0 mOhm
• Recommended Operating Voltage Min.: 5.0 V
• Recommended Operating Voltage Max.: 40.0 V
• Il(sc): 40.0 A

Package and Ordering Code
Standard: P-DSO-28-16
All dimensions in millimetres
Definition of soldering point with temperature T
upper side of solder edge of device pin 15.
Printed circuit board (FR4, 1.5mm thick, one layer
70 m, 6cm
max. power dissipation P
I
Infineon technologies
0.35
L(NOM)
Index Marking
1) Does not include plastic or metal protrusions of 0.15 max rer side
2) Does not include dambar protrusion of 0.05 max per side
+0.15
Ordering Code
1.27
Sales Code
2)
28
1
and thermal resistance R
18.1
2
active heatsink area) as a reference for
0.2 28x
Pin 7,8
-0.4
1)
14
15
tot
0.1
, nominal load current
thja
Q67060-S6133
BTS 737 S3
7.6
10.3
0.4
-0.2
0.35 x 45˚
±0.3
+0.8
1)
s
:
GPS05123
15
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies
Representatives worldwide (see address list).
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-
support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Attention please!
Information
Warnings
Datasheet BTS737S3
2004-Feb-19