TLE 4253GS Infineon Technologies, TLE 4253GS Datasheet - Page 2

no-image

TLE 4253GS

Manufacturer Part Number
TLE 4253GS
Description
Manufacturer
Infineon Technologies
Datasheet

Specifications of TLE 4253GS

Packages
PG-DSO-8
Regulator Type
tracker
Output Voltage
adj.
Accuracy
0.5 %
Max. Output Current
250mA
Dropout Voltage
280mV
Low Dropout Voltage Tracking Regulator
TLE4253
1
Features
Functional Description
The TLE4253 is a monolithic integrated low-dropout voltage tracking regulator in small PG-DSO-8 packages. The
exposed pad (EP) package variant PG-DSO-8 exposed pad offers extremely low thermal resistance. The IC is
designed to supply off-board systems, e. g. sensors in engine management systems under the severe conditions
of automotive applications. Therefore, the IC is equipped with additional protection functions against reverse
polarity and short circuit to GND and battery.
With supply voltages up to 40 V, the output voltage follows a reference voltage applied at the adjust input with high
accuracy. The reference voltage applied directly to the adjust input or by an e. g. external resistor divider can be
2.0 V at minimum.
The output is able to drive loads up to 250 mA at minimum while the device follows the e. g. 5 V output of a main
voltage regulator acting as reference with high accuracy.
The TLE4253 tracker can be set into shutdown mode in order to reduce the quiescent current to an extremly low
value. This makes the IC suitable to low power battery applications.
Type
TLE4253GS
TLE4253E
Data Sheet
Tight output tracking tolerance to reference
Output voltage adjust down to 2.0 V
Stable with ceramic output capacitor
Flexibility of output voltage adjust higher or lower than reference,
proportional to the reference voltage
250 mA output current capability
Low dropout voltage
Combined tracking / enable input
Very low current consumption in OFF mode
PG-DSO-8 packages with lowest thermal resistance
Wide input voltage range -42 V ≤
Wide temperature range: -40 °C ≤ T
Output protected against short circuit to GND and battery
Overtemperature protection
Reverse polarity proof
Suitable for use in automotive electronics
Green Product (RoHS compliant)
AEC Qualified
Overview
V
Package
PG-DSO-8
PG-DSO-8 exposed pad
I
j
≤ 45 V
≤ 150 °C
2
Marking
4253
4253E
PG-DSO-8 exposed pad
PG-DSO-8
Rev. 1.2, 2009-11-09
TLE4253GS

Related parts for TLE 4253GS