TMP86xy46NG Toshiba, TMP86xy46NG Datasheet - Page 167

• Manufacturer Part Number: TMP86xy46NG
• Manufacturer: Toshiba

Specifications of TMP86xy46NG

• Package: SDIP42
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 8/16/32
• Ram Size: 512/512/1K
• Driver Led: 19
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: -
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 8
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 33
• Power Supply (v): 4.5 to 5.5

16.8 Handling Precaution
16. Electrical Characteristics
16.7 Recommended Oscillating Conditions
16.8 Handling Precaution
Note 1: A quartz resonator can be used for high-frequency oscillation only when V
Note 2: To ensure stable oscillation, the resonator position, load capacitance, etc. must be appropriate. Because these factors are
Note 3: For the resonators to be used with Toshiba microcontrollers, we recommend ceramic resonators manufactured by Murata
- The solderability test conditions for lead-free products (indicated by the suffix G in product name) are shown
-
below.
1. When using the Sn-37Pb solder bath
2. When using the Sn-3.0Ag-0.5Cu solder bath
When using the device (oscillator) in places exposed to high electric fields such as cathode-ray tubes, we recommend elec-
trically shielding the package in order to maintain normal operating condition.
a ceramic resonator.
greatly affected by board patterns, please be sure to evaluate operation on the board on which the device will actually be
mounted.
Manufacturing Co., Ltd.
For details, please visit the website of Murata at the following URL:
http://www.murata.com
Note: The pass criteron of the above test is as follows:
Solder bath temperature = 230 °C
Dipping time = 5 seconds
Number of times = once
R-type flux used
Solder bath temperature = 245 °C
Dipping time = 5 seconds
Number of times = once
R-type flux used
(1) High-frequency Oscillation
C
1
XIN
Solderability rate until forming ≥ 95 %
XOUT
C
2
Page 156
(2) Low-frequency Oscillation
C
XTIN
1
XTOUT
DD
is 2.7 V or above. If V
C
2
DD
TMP86PM46NG
is below 2.7 V, use