73S8014R Maxim, 73S8014R Datasheet - Page 8

• Manufacturer Part Number: 73S8014R
• Description: The 73S8014R/RN devices are single smart card (ICC) interface circuits, firmware compatible with 8024-type devices for configurations where only asynchronous cards are to be supported, and are derived from the 73S8024RN industry standard electrical i
• Manufacturer: Maxim

2 Electrical Specifications
This section provides the following:
2.1 Absolute Maximum Ratings
Table 2 lists the maximum operating conditions for the 73S8014R. Permanent device damage may occur if
absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for extended
periods may affect device reliability. The smart card interface pins are protected against short circuits to V
ground, and each other.
2.2 Recommended Operating Conditions
Function operation should be restricted to the recommended operating conditions specified in Table 3.
8
Absolute maximum ratings
Recommended operating conditions
Package thermal parameters
Smart card interface requirements
Digital signals characteristics
DC Characteristics
Voltage Fault Detection Circuits
*Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
Parameter
Supply Voltage V
Supply Voltage V
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
ESD Tolerance – Card interface pins
ESD Tolerance – Other pins
Parameter
Supply Voltage V
Supply Voltage V
Ambient Operating Temperature
Input Voltage for Digital Inputs
DD
PC
DD
PC
Table 3: Recommended Operating Conditions
Table 2: Absolute Maximum Device Ratings
Rating
-0.5 to 6.0 VDC
-0.5 to 6.0 VDC
-0.3 to (V
-60 to 150°C
-0.3 to (V
-0.3 to (V
+/- 6kV
+/- 2kV
Rating
2.7 to 5.5 VDC
4.75 to 5.5 VDC
-40°C to +85°C
0V to V
DD
DD
DD
CC
+ 0.3V
+0.5) VDC
+0.5) VDC
+ 0.5) VDC
Rev. 1.0
CC
,