968137-5 TE Connectivity, 968137-5 Datasheet - Page 8

• Manufacturer Part Number: 968137-5
• Manufacturer: TE Connectivity

Specifications of 968137-5

• Wire/cable Type: FLR (Thin Walled Cable)
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Insulation Diameter (mm [in]): 2.20-3.00 [.086-.118]
• Cable Type: FLR (Thin Walled Cable)
• Tab Width (mm [in]): 2.79 [0.11]
• Wire Range (mm [awg]): 1.00-2.50² [17-13]
• Staggered Centerline: Without
• Wire Type: Stranded
• Mates With Centerline: 5.08 x 5.08 [.200 x .200]
• Contact Type: Tab
• Tab Contact Size: 2.8
• Contact Finish: Gold
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• Packaging Quantity: 4,000

Rev. B
4 REQUIREMENTS
4.1 General Requirements
All tests executed with the individual components must comply with the inspection plan in this specification.
- Number of samples: at least 10
- The specified tools must be used for the mechanical tests.
- The samples must be free of visible damage.
- The samples must comply with the current drawings.
- Only parts from series production are to be used for testing.
- The wires used must possess waterproof insulation, be sufficiently resistant to deformation under heat,
- For waterproofness tests, standard rods whose diameter corresponds to a worst-case wire (to DIN 72551,
- Movement rate for mechanical tests: 25mm/min.
- The contact parts must be applied with AMP tools.
- Application of the contacts to Spec. 114-18141-1.
4.2 Ratings
and be free of damage, holes and grooves.
Part 6) shall be used instead of FLR wires.
In individual cases, the transferability of the results to wire insulation materials with sufficient
temperature resistance must be proved by tests.
Current carrying capacity
Maximum mating cycles
Temperature range
MPQ
max. 34A
20 for tin-plated contacts
100 for gold-plated contacts
-40 C to +130 C for tin-plated contacts
-40 C to +150 C for gold-plated contacts
PQ
max. 45A
108-18476-1
8
of
25