7-1658016-1 TE Connectivity, 7-1658016-1 Datasheet - Page 2

• Manufacturer Part Number: 7-1658016-1
• Manufacturer: TE Connectivity

Specifications of 7-1658016-1

• Product Type: Connector
• Product Line: MICTOR SB
• Impedance (?): 50
• Solder Tail Contact Plating: Gold over Nickel
• Number Of Positions: 28
• Centerline (mm [in]): 0.80 [0.031]
• Polyamide Film Pad: With
• Contact Loading Pattern: Differential Load
• Contact Plating, Mating Area, Material: Select Gold
• Contact Material (signal): Phosphor Bronze
• Contact Material (ground): Phosphor Bronze
• Connector Style: Plug
• Housing Color: Black
• Housing Material: Liquid Crystal Polymer (LCP)
• Stack Height (mm [in]): 16.00 [0.630]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -65 – +125
• Packaging Method: Tape & Reel

3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Solderability.
Vibration, radom.
Mechanical shock.
Rev B
Ratings
●
●
●
●
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 125 volts AC
Current:
•
•
Temperature:
Characteristic Impedance:50 ohms
Signal contacts: 1.25 amperes
Ground contacts:9.5 amperes
-65 to 125 / C
Meets requirements of product
drawing
Meets visual requirements.
Î
signal contacts.
Î
ground contacts.
5000 megohms minimum initial.
1000 megohms minimum after
exposures.
1 minute hold with no breakdown
or flashover. 0.5 milliampere
maximum leakage current.
Solderable area shall have a
minimum of 95% solder coverage.
No discontinuities of 1
microsecond
or longer duration.
See Note.
No discontinuities of 1
microsecond
or longer duration.
See Note.
R 15 milliohms maximum for
R 5 milliohms maximum for
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent signal
contacts, and between all signal
contacts and ground of mated
specimens.
EIA-364-20, Condition I.
675 volts AC at sea level. Test
between adjacent signal contacts,
and between all signal contacts
and ground of mated specimens.
EIA-638.
Subject contacts to solderability.
EIA-364-28, Test Condition V.
Subject specimens to 7.56 G's rms
between 50 to 2000 Hz. One hour
in each of 3 mutually perpendicular
planes.
EIA-364-27, Method A.
Subject specimens to 50 G's half-
sine shock pulses of 11
milliseconds duration. Three
shocks in each direction applied
along 3 mutually perpendicular
planes, 18 total shocks.
Procedure
108-2139
2 of 5