533305-8 TE Connectivity, 533305-8 Datasheet - Page 2

• Manufacturer Part Number: 533305-8
• Manufacturer: TE Connectivity

Specifications of 533305-8

• Product Line: AMP ECONOMATE
• Product Type: Contact
• Number Of Dual Positions: 35
• Post Type: Compliant Post
• Proprietary Name: AMP ECONOMATE
• Termination Post Length (mm [in]): 12.70 [0.500]
• Centerline (mm [in]): 2.54 [0.100]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (50)
• Contact Base Material: Beryllium Copper
• Rohs/elv Compliance: Not reviewed for ELV/RoHS compliance
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Packaging Method: Combs

3.5.
Exam ination of product.
Low level contact resistance.
Contact resistance.
Insulation resistance.
Dielectric withstanding voltage.
Current overload.
Vibration.
Physical shock.
Rev E
Test Requirem ents and Procedures Sum m ary
Test Description
Specim ens shall be free of burrs
and all contact edges except for the
wire-wrap tail shall be free of sharp
edges. No evidence of other
physical dam age or defects that
would im pair norm al function.
1 ohm m axim um .
8 m illiohm s m axim um .
25,000 m egohm s m inim um .
One m inute hold with no breakdown
or flashover.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
Visual inspection.
Subject each pair of m ated contacts
to 1 m illiam pere m axim um and 20
m illivolts m axim um open circuit
voltage.
See Figure 3.
MIL-STD-202, Method 307.
Measure contact resistance across
each pair of m ated contacts using a
test current of 1 am pere DC.
See Figure 3.
MIL-STD-202, Method 302, Test
Condition B, 500 volts DC.
Test between all contacts and
between insulated contacts and
conductive m ounting plate, if
applicable.
MIL-STD-202, Method 301.
1,000 volts AC at sea level.
Test between all contacts and
between insulated contacts and
conductive m ounting plate, if
applicable.
Subject series wired m ated contacts
to a DC current overload of 125% of
rated current (3.75 am peres) for a
period of 2 hours, im m ediately
followed by an increase to 150% of
rated current (4.5 am peres) for 5
m inutes, then current off.
MIL-STD-202, Method 204, Test
Condition B.
Subject specim ens to 10 to 2,000
Hz.
MIL-STD-202, Method 213, Test
Condition B.
Procedure
108-12057
2 of 7