650074-000 TE Connectivity, 650074-000 Datasheet - Page 2

• Manufacturer Part Number: 650074-000
• Manufacturer: TE Connectivity

Specifications of 650074-000

• Splice Type: Butt [in-line]
• Wire Material: Silver, Tin
• Connection Type: Crimp
• Color Code: Red
• Crimp Barrel Size (cma [mm²]): 304 – 1510 [0.15 – 0.75]
• Crimp Barrel Plating: Tin
• Mil Specification [mil-s-81824]: Yes
• Side 1 Max. # Of Wires: 2
• Side 2 Max. # Of Wires: 2
• Side 1 Sealing Insert I.d. (mm [in]): 2.16 [0.085]
• Side 2 Sealing Insert I.d. (mm [in]): 2.16 [0.085]
• Government/industry Qualification: Yes
• Government/industry Part Number: M81824/1-1
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (max.) (°c): 150
• Application Type: Wire to wire splicing

MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
2. SEALING RINGS: Immersion resistant thermoplastic. Color: one clear, one color coded (see table below).
3. CRIMP SPLICER:
APPLICATION
1. These parts are designed to provide immersion resistant in-line splices of 1 to 1 wires falling within size range listed above,
2. Parts will meet all requirements of MIL-S-81824/1 when installed as outlined below. Assembly is not required for
3. Acceptance sampling shall be in accordance with Paragraph 4.6.1 of MIL-S-81824.
4. Packing and packaging shall be in accordance with Sections 5, Level C, of MIL-S-81824.
5. This document takes precedence over documents reference herein.
ASSEMBLY PROCEDURE:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
Print Date: 11-May-11
M. FORONDA
and having insulations rated for 135 C.
fluoride.
acceptance testing inspection.
Base Metal: Copper alloy 101 or 102 per ASTM B-75.
Plating: Tin, per MIL-T-10727, Type I
Color code: See table below.
1.
2.
3.
4.
5.
Slide sealing sleeve onto one of the wires to be spliced.
Strip wires 5/16” to 11/32”.
Insert one wire into barrel of crimp splicer and crimp using a Raychem AD-1377 crimp tool. Repeat for other wire.
Center sealing sleeve over the splice.
Apply heat, using an approved heat source, first to one of the inserts and then the other. Heat should be applied until
insert melts and flows axially along the wire.
ANGLES: N/A
ROUGHNESS IN
MICRON
D-436-36
D-436-37
D-436-38
Product
Name
If this document is printed it becomes uncontrolled. Check for the latest revision.
REPLACES:
Menlo Park, CA 94025, USA
305 Constitution Drive
TE Connectivity
N/A
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
SPECIFICATION CONTROL DRAWING
M81824/-1-1
M81824/-1-2
M81824/-1-3
Equivalent
MIL Spec
DCR NUMBER:
D000566
Raychem
Products
Wire Range
(AWG)
26 - 20
20 - 16
16 - 12
TITLE:
DOCUMENT NO.:
DATE:
PROD. REV.
SEE TABLE
IN-LINE SPLICE SEALING SYSTEM,
11MAY11
YELLOW
BLUE
Color
RED
Code
1 TO 1 MIL-S-81824/1
D-436-36/-37/-38
SCALE:
None
Wgt. - Lbs/Mpc
SIZE:
2.720
A
1.02
1.61
max
DOC ISSUE:
SHEET:
2
2 of 2