MP915 Rhopoint Components, MP915 Datasheet
MP915
Manufacturer Part Number
MP915
Description
Manufacturer
Rhopoint Components
Datasheet
1.MP915.pdf
(2 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
MP915-0.25-1%
Manufacturer:
CADDOCK
Quantity:
301
Part Number:
MP915-7.50F-ND
Manufacturer:
CADDOCK
Quantity:
20 000
Part Number:
MP915-8.00-1%
Manufacturer:
CADDOCK
Quantity:
20 000
Part Number:
MP915-8.00-1％
Manufacturer:
CADOCK
Quantity:
20 000
Part Number:
MP9150CQ-LF-Z
Manufacturer:
MPS/美国芯源
Quantity:
20 000
Low Cost
an Exposed Ceramic Heat Dissipating Mounting Surface
Use your thermal design experience with power semiconductors in TO-126, TO-220,
and TO-247 style power packages to help you get the most out of this unique family of
power resistors. The thermal design issues are the same where power handling
capability is based on the case temperature which is maintained in your design.
RHOPOINT COMPONENTS LTD
Holland Road, Hurst Green,
Oxted, Surrey, RH8 9AX
Phone: +44 (0) 1883 717988
Fax: +44 (0) 1883 712938
2
Derating Curve:
RHOPOINT COMPONENTS LTD.
Holland Road
Hurst Green
Oxted, Surrey, RH8 9AX
the Type MG Precision High Voltage Resistors' outstanding
combination of performance features:
•
•
•
•
•
•
many years of use in equipment that demands the highest
reliability and stability, including TWT amplifiers, X-ray
systems, geophysical instruments, and medical electronics.
© 2004 Caddock Electronics, Inc.
Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
Fax: (541) 496-0408
UK & Ireland
Distributors
© 2004 Caddock Electronics, Inc.
Temperature Coefficient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
the Type MG Precision High Voltage Resistors' outstanding
combination of performance features:
•
•
•
•
•
•
many years of use in equipment that demands the highest
reliability and stability, including TWT amplifiers, X-ray
systems, geophysical instruments, and medical electronics.
Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
Fax: (541) 496-0408
Power Film Resistors
Temperature Coefficient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
the Type MG Precision High Voltage Resistors' outstanding
combination of performance features:
•
•
•
•
•
the Type MG Precision High Voltage Resistors' outstanding
combination of performance features:
•
•
•
•
many years of use in equipment that demands the highest
•
reliability and stability, including TWT amplifiers, X-ray
•
systems, geophysical instruments, and medical electronics.
•
many years of use in equipment that demands the highest
reliability and stability, including TWT amplifiers, X-ray
systems, geophysical instruments, and medical electronics.
Temperature Coefficient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
Temperature Coefficient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability and Precision Tolerances.
Low Cost
an Exposed Ceramic Heat Dissipating Mounting Surface
Use your thermal design experience with power semiconductors in TO-126, TO-220,
and TO-247 style power packages to help you get the most out of this unique family of
power resistors. The thermal design issues are the same where power handling
capability is based on the case temperature which is maintained in your design.
of
MG650
MG655
MG660
MG680
MG710
MG712
MG714
MG715
MG716
MG717
MG720
MG721
MG725
MG730
MG731
MG735
MG740
MG745
MG750
MG780
MG785
MG810
MG815
RHOPOINT COMPONENTS LTD
Holland Road, Hurst Green,
Oxted, Surrey, RH8 9AX
Phone: +44 (0) 1883 717988
Fax: +44 (0) 1883 712938
MG650
MG655
MG660
MG680
MG710
MG712
MG714
MG715
MG716
MG717
MG720
MG721
MG725
MG730
MG731
MG735
DIMENSIONS IN INCHES AND (MILLIMETERS)
MG740
MG745
MG750
MG780
MG785
MG810
MG815
Model
Model
MG650
MG655
MG660
MG680
MG710
Single-resistor values as high as 10,000 Megohms.
Maximum continuous operating voltages as high as
48,000 volts ("-15" ratings).
Overvoltage capabilities of 150% of standard working
voltages for all models and values, (except "-15" ratings).
Resistance Tolerances from ±1.0% to ±0.1%.
Temperature Coefficient, for standard resistance range, of
80 ppm/°C in combination with resistance tolerances as
tight as ±0.1%.
Type MG resistors have demonstrated stability of 0.01%
per 1,000 hours in extended load life testing of standard
resistance range values.
Model
Model
Single-resistor values as high as 10,000 Megohms.
Maximum continuous operating voltages as high as
48,000 volts ("-15" ratings).
Overvoltage capabilities of 150% of standard working
voltages for all models and values, (except "-15" ratings).
Resistance Tolerances from ±1.0% to ±0.1%.
Temperature Coefficient, for standard resistance range, of
80 ppm/°C in combination with resistance tolerances as
tight as ±0.1%.
Type MG resistors have demonstrated stability of 0.01%
per 1,000 hours in extended load life testing of standard
resistance range values.
No.
Single-resistor values as high as 10,000 Megohms.
Maximum continuous operating voltages as high as
Certain products shown in this catalog are covered by one or more patents, there are also patents pending.
48,000 volts ("-15" ratings).
Overvoltage capabilities of 150% of standard working
voltages for all models and values, (except "-15" ratings).
Resistance Tolerances from ±1.0% to ±0.1%.
Temperature Coefficient, for standard resistance range, of
80 ppm/°C in combination with resistance tolerances as
tight as ±0.1%.
Single-resistor values as high as 10,000 Megohms.
Type MG resistors have demonstrated stability of 0.01%
Maximum continuous operating voltages as high as
per 1,000 hours in extended load life testing of standard
48,000 volts ("-15" ratings).
resistance range values.
Overvoltage capabilities of 150% of standard working
voltages for all models and values, (except "-15" ratings).
Resistance Tolerances from ±1.0% to ±0.1%.
Temperature Coefficient, for standard resistance range, of
80 ppm/°C in combination with resistance tolerances as
tight as ±0.1%.
Type MG resistors have demonstrated stability of 0.01%
per 1,000 hours in extended load life testing of standard
resistance range values.
MP915
• • • • •
• • • • •
No.
• • • • •
• • • • •
MG 660
MG 680
MG 710
MG 712
MG 714
MG 715
MG 716
MG 720
MG 725
Low Cost
MG 717
an Exposed Ceramic Heat Dissipating Mounting Surface
MG 721
Use your thermal design experience with power semiconductors in TO-126, TO-220,
and TO-247 style power packages to help you get the most out of this unique family of
MG 730
power resistors. The thermal design issues are the same where power handling
capability is based on the case temperature which is maintained in your design.
MG 735
MG 745
MG 731
MP916, MP925, and MP930
MG 740
MG 750
MG 780
MP9100
MG 785
MG 810
MG 815
MG 650
MG 655
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
No.
RHOPOINT COMPONENTS LTD
Holland Road, Hurst Green,
Oxted, Surrey, RH8 9AX
Phone: +44 (0) 1883 717988
Fax: +44 (0) 1883 712938
Power Film Resistors
2
Caddock's Micronox
This exceptional performance has been proven through
Caddock's Micronox
This exceptional performance has been proven through
Caddock's Micronox
Caddock's Micronox
This exceptional performance has been proven through
This exceptional performance has been proven through
Page
Power Film Resistors
MP915
• • • • •
• • • • •
• • • • •
• • • • •
MP916, MP925, and MP930
• • • • •
• • • • •
• • • • •
• • • • •
MP9100
• • • • •
• • • • •
• • • • •
• • • • •
15 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.020 ohm to 1 K.
Non-Inductive Design.
Up to 30 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.010 ohm to 100 K.
Non-Inductive Design.
100 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.050 ohm to 100 ohm.
Non-Inductive Design.
(38.10 ± 3.18)
1.500 ± .125
MP915
• • • • •
• • • • •
• • • • •
• • • • •
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
MP916, MP925, and MP930
MP9100
Models with low inductance construction are in shaded areas.
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
Watt-
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
• • • • •
Models with Caddock's Non-Inductive Resistance Pattern are in non-shaded areas.
Models with low inductance construction are in shaded areas.
Watt-
Models with Caddock's Non-Inductive Resistance Pattern are in non-shaded areas.
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
10.0
15.0
Temperature Coefficient as tight as 80 ppm/°C, Combined with Excellent Long-Term Stability, and Precision Tolerances.
age
10.0
15.0
Watt-
Watt-
Type MG Precision High Voltage Resistors' outstanding
combination of performance features:
• Single-resistor values as high as 10,000 Megohms.
• Maximum continuous operating voltages as high as
• Overvoltage capabilities of 150% of standard working
• Resistance Tolerances from ±1.0% to ±0.1%.
• Temperature Coefficient, for standard resistance range, of
• Typical extended life stability of 0.02% per 1,000 hours
many years of use in equipment that demands the highest
reliability and stability, including TWT amplifiers, X-ray systems,
geophysical instruments and medical electronics
0.5
0.5
0.6
0.8
1.0
0.6
1.0
1.0
1.5
1.5
2.0
2.0
2.5
3.0
2.6
3.6
3.6
5.0
5.0
7.5
8.0
age
0.5
0.5
0.6
0.8
1.0
0.6
1.0
1.0
1.5
1.5
2.0
2.0
2.5
3.0
2.6
3.6
3.6
5.0
5.0
7.5
8.0
RHOPOINT COMPONENTS LTD.
Holland Road
Hurst Green
Oxted, Surrey, RH8 9AX
age
0.5
0.5
0.6
0.8
1.0
RATED POWER OR
RATED VOLTAGE, %
15 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.020 ohm to 1 K.
Non-Inductive Design.
Up to 30 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.010 ohm to 100 K.
Non-Inductive Design.
100 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.050 ohm to 100 ohm.
Non-Inductive Design.
MG 650
MG 655
MG 660
MG 680
MG 710
MG 712
MG 714
MG 715
MG 716
MG 717
MG 720
MG 721
MG 725
MG 730
MG 731
MG 735
MG 740
MG 745
MG 750
MG 780
MG 785
MG 810
MG 815
Model
48,000 volts ("-15" Ratings).
80 ppm/°C in combination with resistance tolerances as
tight as ±0.1%.
for standard resistance range as demonstrated by
reliability testing.
voltages for all models and values, (except "-15" ratings).
No.
15 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.020 ohm to 1 K.
Non-Inductive Design.
Up to 30 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.010 ohm to 100 K.
Non-Inductive Design.
100 Watts at +25
Exposed Ceramic Heat Dissipating Mounting Surface.
Resistance Range of 0.050 ohm to 100 ohm.
Non-Inductive Design.
Resistors
Caddock's Micronox® resistance films are the source of the
This exceptional performance has been proven through
TO-126 Style Power Package
Continuous
Continuous
Oper. Volt.
Continuous
Type MG Precision High Voltage Resistors
Oper. Volt.
Heat Sink Mountable Design featuring
Oper. Volt.
TO-247 Style Power Package
10,000
10,000
15,000
10,000
15,000
20,000
25,000
30,000
Type MG Precision High Voltage Resistors
10,000
10,000
15,000
10,000
15,000
20,000
25,000
30,000
Type MG Precision High Voltage Resistors
Type MG Precision High Voltage Resistors
Type MG Precision High Voltage Resistors
1,000
2,000
4,000
1,000
1,000
2,000
4,000
2,000
6,000
4,000
6,000
4,000
6,000
Max.
Max.
1,000
2,000
4,000
1,000
1,000
2,000
4,000
2,000
6,000
4,000
6,000
4,000
6,000
Max.
1,000
2,000
4,000
Max.
Now with Extended Resistance Range to 10,000 Megohms and Additional Models
TO-126 Style Power Package
Models with low inductance construction are in shaded areas.
Models with Caddock's Non-Inductive Resistance Pattern are in non-shaded areas.
600
600
Watt-
600
600
10.0
15.0
Heat Sink Mountable Design featuring
age
600
600
TO-126 Style Power Package
1.0
1.0
1.0
1.5
1.5
TO-247 Style Power Package
2.0
2.0
2.5
3.0
2.6
3.6
3.6
5.0
5.0
7.5
8.0
MP900 and MP9000 Series Kool-Pak
Heat Sink Mountable Design featuring
.5
.5
.6
.8
.6
TO-247 Style Power Package
Type MG Precision High Voltage Resistors
MP900 and MP9000 Series Kool-Pak
Continuous
100
Overload
Oper. Volt.
Overload
°
80
60
40
20
Overload
Overload
Rating
Type 1
Type 1
Type 1
Type 1
Type 1
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
MP900 and MP9000 Series Kool-Pak
Type 1
Type 1
Type 1
Type 1
Type 1
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Type 2
Rating
0
Type 2
C Case Temperature,
10,000
10,000
15,000
10,000
15,000
20,000
25,000
30,000
Rating
Type 1
Type 1
Type 1
Type 1
Type 1
A
°
Max.
1,000
2,000
4,000
1,000
1,000
2,000
4,000
2,000
6,000
4,000
6,000
4,000
6,000
C Case Temperature,
600
600
25
°
®
®
AMBIENT TEMPERATURE, °C
C Case Temperature,
®
°
®
°
C Case Temperature,
°
C Case Temperature,
°
resistance films are the source of
C Case Temperature,
Strength
resistance films are the source of
Strength
C Case Temperature,
Dielect.
resistance films are the source of
resistance films are the source of
Dielect.
75
Strength
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Dielect.
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Dielect.
Strength
Dielect.
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
750
°
750
750
750
750
750
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
RHOPOINT COMPONENTS LTD.
C Case Temperature,
°
CAD
750
750
750
750
750
750
750
750
750
750
750
750
750
CAD
RHOPOINT COMPONENTS LTD
C Case Temperature,
125
B
200 �
200 �
400 �
600 �
800 �
800 �
200 �
400 �
600 �
600 �
200 �
500 �
200 �
750 �
300 �
400 �
600 �
800 �
200 �
200 �
400 �
600 �
800 �
800 �
200 �
400 �
600 �
600 �
1.5 K
200 �
500 �
200 �
750 �
300 �
400 �
600 �
800 �
1.5 K
Min.
For Caddock Distributors listed by country see caddock.com/contact/dist.html
Min.
TO-220 Style Power Package
200 �
200 �
400 �
For Caddock Distributors listed by country see caddock.com/contact/dist.html
600 �
800 �
1 K
1 K
1 K
1 K
1 K
1 K
1 K
1 K
RHOPOINT COMPONENTS LTD
Min.
175
200 Ω
200 Ω
400 Ω
600 Ω
800 Ω
800 Ω
200 Ω
400 Ω
600 Ω
600 Ω
200 Ω
500 Ω
200 Ω
750 Ω
300 Ω
400 Ω
600 Ω
800 Ω
1.5 K
RHOPOINT COMPONENTS LTD
Min.
1 K
1 K
C
1 K
1 K
Voltage
TO-220 Style Power Package
178 Meg
288 Meg
128 Meg
192 Meg
320 Meg
400 Meg
384 Meg
RHOPOINT COMPONENTS LTD.
178 Meg
288 Meg
128 Meg
192 Meg
320 Meg
400 Meg
384 Meg
6.5 Meg
6.5 Meg
225
TO-220 Style Power Package
40 Meg
64 Meg
26 Meg
70 Meg
17 Meg
51 Meg
77 Meg
26 Meg
70 Meg
17 Meg
51 Meg
77 Meg
40 Meg
64 Meg
Min.
N/A
N/A
Min.
N/A
N/A
N/A
N/A
N/A
N/A
-15
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
178 Meg
288 Meg
128 Meg
192 Meg
320 Meg
400 Meg
384 Meg
-15
Min.
6.5 Meg
N/A
N/A
N/A
N/A
N/A
-15
26 Meg
70 Meg
17 Meg
51 Meg
77 Meg
40 Meg
64 Meg
Min.
N/A
N/A
-15
N/A
N/A
N/A
N/A
N/A
N/A
derated to zero at +150
Resistance
e-mail: caddock@caddock.com • web: www.caddock.com
Resistance
DOC
e-mail: caddock@caddock.com • web: www.caddock.com
DOC
Resistance
275
Resistance
derated to zero at +175
Resistance
1,000 Meg
1,250 Meg
2,000 Meg
1,000 Meg
1,250 Meg
2,000 Meg
Standard
Standard
150 Meg
100 Meg
200 Meg
250 Meg
150 Meg
300 Meg
300 Meg
500 Meg
500 Meg
750 Meg
Standard
150 Meg
100 Meg
200 Meg
250 Meg
150 Meg
300 Meg
300 Meg
500 Meg
500 Meg
750 Meg
derated to zero at +150
1,000 Meg
1,250 Meg
2,000 Meg
Max.
derated to zero at +150
10 Meg
20 Meg
50 Meg
20 Meg
20 Meg
50 Meg
75 Meg
75 Meg
Max.
10 Meg
20 Meg
50 Meg
20 Meg
20 Meg
50 Meg
75 Meg
75 Meg
Standard
derated to zero at +150
Max.
5 Meg
8 Meg
150 Meg
100 Meg
200 Meg
250 Meg
150 Meg
300 Meg
300 Meg
500 Meg
500 Meg
750 Meg
10 Meg
20 Meg
50 Meg
5 Meg
8 Meg
derated to zero at +175
derated to zero at +175
10 Meg
20 Meg
50 Meg
20 Meg
20 Meg
50 Meg
75 Meg
75 Meg
5 Meg
8 Meg
Max.
5 Meg
8 Meg
Ordering Information
Design Assistance in Developing High Voltage Resistor Sets with
Low TC Tracking.
high voltage resistor sets, call or write our Applications Engineering and we will
be pleased to offer the best solution from our high voltage resistor product
capabilities.
.
derated to zero at +150
derated to zero at +150
Extended
TO-126, TO-220 and TO-247 Style
Extended
10,000 M
10,000 M
1,000 M
1,500 M
1,500 M
2,500 M
3,750 M
5,000 M
6,250 M
1,000 M
1,500 M
1,500 M
2,500 M
3,750 M
5,000 M
6,250 M
Extended
225 M
300 M
750 M
750 M
Extended
225 M
300 M
750 M
750 M
Max.
For immediate engineering assistance in developing Low Ratio TC matched
Max.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10,000 M
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1,000 M
1,500 M
1,500 M
2,500 M
3,750 M
5,000 M
6,250 M
Max.
K
Max.
225 M
300 M
750 M
750 M
N/A
K
N/A
N/A
N/A
N/A
Exposed Ceramic
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Heat Dissipating
Power Resistor
High
TO-126, TO-220 and TO-247 Style
TO-126, TO-220 and TO-247 Style
Mounting
Surface
Dimensions in inches and (millimeters)
New
(101.60 �3.05)
(127.00 �3.05)
(152.40 �3.05)
(101.60 �3.05)
(127.00 �3.05)
(152.40 �3.05)
Dimensions in inches and (millimeters)
Exposed Ceramic
Exposed Ceramic
Dimensions in inches and (millimeters)
(25.40 �1.02)
(10.16 �.152)
(14.27 �1.52)
(19.05 �1.52)
(25.40 �1.52)
(18.03 �1.27)
(38.10 �2.03)
(25.40 �1.27)
(50.80 �2.03)
(38.10 �2.03)
(25.40 �1.52)
(50.80 �2.03)
(38.10 �1.52)
(76.20 �2.54)
(53.98 �1.52)
(79.38 �1.52)
Dimensions in inches and (millimeters)
(25.40 �1.02)
(10.16 �.152)
(14.27 �1.52)
(19.05 �1.52)
(25.40 �1.52)
(18.03 �1.27)
(38.10 �2.03)
(25.40 �1.27)
(50.80 �2.03)
(38.10 �2.03)
(25.40 �1.52)
(50.80 �2.03)
(38.10 �1.52)
(76.20 �2.54)
(53.98 �1.52)
(79.38 �1.52)
with
(101.60 ±3.05)
(127.00 ±3.05)
(152.40 ±3.05)
Dimensions in inches and (millimeters)
(12.70 �.76)
(19.05 �.76)
1.000 �.040
1.000 �.060
1.500 �.080
1.000 �.050
2.000 �.080
1.500 �.080
1.000 �.060
2.000 �.080
Heat Dissipating
1.500 �.060
Heat Dissipating
3.000 �.100
2.125 �.060
3.125 �.060
4.000 �.120
5.000 �.120
6.000 �.120
(12.70 �.76)
(19.05 �.76)
1.000 �.040
1.000 �.060
1.500 �.080
1.000 �.050
2.000 �.080
1.500 �.080
1.000 �.060
2.000 �.080
1.500 �.060
3.000 �.100
2.125 �.060
3.125 �.060
4.000 �.120
5.000 �.120
6.000 �.120
Power Resistor
Power Resistor
(25.40 �1.02)
(7.95 �.51)
(7.95 �.76)
(25.40 ±1.02)
(10.16 ±.152)
(14.27 ±1.52)
(19.05 ±1.52)
(25.40 ±1.52)
(18.03 ±1.27)
.710 �.050
(38.10 ±2.03)
(25.40 ±1.27)
(50.80 ±2.03)
(38.10 ±2.03)
(25.40 ±1.52)
(50.80 ±2.03)
(38.10 ±1.52)
(76.20 ±2.54)
(53.98 ±1.52)
(79.38 ±1.52)
.400 �.060
.562 �.060
.750 �.060
.710 �.050
(7.95 �.51)
(7.95 �.76)
.400 �.060
.562 �.060
.750 �.060
(12.70 �.76)
(19.05 �.76)
1.000 �.040
.313 �.020
.313 �.030
(12.70 ±.76)
(19.05 ±.76)
1.000 ±.040
1.000 ±.060
1.500 ±.080
1.000 ±.050
2.000 ±.080
1.500 ±.080
1.000 ±.060
2.000 ±.080
1.500 ±.060
3.000 ±.100
2.125 ±.060
3.125 ±.060
4.000 ±.120
5.000 ±.120
6.000 ±.120
.500 �.030
.750 �.030
.313 �.020
.313 �.030
.500 �.030
.750 �.030
.710 ±.050
(7.95 �.51)
(7.95 �.76)
(7.95 ±.51)
(7.95 ±.76)
.400 ±.060
.562 ±.060
.750 ±.060
°
.313 �.020
.313 �.030
.500 �.030
.750 �.030
.313 ±.020
.313 ±.030
.500 ±.030
.750 ±.030
A
A
C.
Mounting
Mounting
Surface
Surface
°
A
A
New
New
C.
.
Tel: +44 (0) 870 608 1188
Model Number:
with
with
Preconditioning for Power and Voltage Ratings
are for continuous duty.
stress voltage levels applied during the manufacturing
process to provide for stable resistor performance even
under momentary overload conditions.
listed in the table may be specified by adding "-15" to the
model number (Example: MG750-15).
and overvoltage ratings do not apply to the "-15" resistors.
Resistance ranges for "-15" resistors shown in the table are
from "-15 Min." to "Standard Max."
Non-Inductive Performance
Non-Inductive Design which uses a serpentine resistive
pattern that provides for neighboring lines to carry current in
opposite directions, thereby achieving maximum cancellation
of flux fields over the entire length of the resistor.
efficient non-inductive construction is accomplished without
derating of any performance advantages.
Preconditioning for Power and Voltage Ratings
are for continuous duty.
stress voltage levels applied during the manufacturing
process to provide for stable resistor performance even
under momentary overload conditions.
listed in the table may be specified by adding "-15" to the
model number (Example: MG750-15).
and overvoltage ratings do not apply to the "-15" resistors.
Resistance ranges for "-15" resistors shown in the table are
from "-15 Min." to "Standard Max."
Non-Inductive Performance
Non-Inductive Design which uses a serpentine resistive
pattern that provides for neighboring lines to carry current in
opposite directions, thereby achieving maximum cancellation
of flux fields over the entire length of the resistor.
efficient non-inductive construction is accomplished without
derating of any performance advantages.
°
°
Preconditioning for Power and Voltage Ratings
are for continuous duty.
stress voltage levels applied during the manufacturing
process to provide for stable resistor performance even
under momentary overload conditions.
listed in the table may be specified by adding "-15" to the
model number (Example: MG750-15).
and overvoltage ratings do not apply to the "-15" resistors.
Resistance ranges for "-15" resistors shown in the table are
from "-15 Min." to "Standard Max."
Non-Inductive Performance
Non-Inductive Design which uses a serpentine resistive
pattern that provides for neighboring lines to carry current in
opposite directions, thereby achieving maximum cancellation
of flux fields over the entire length of the resistor.
efficient non-inductive construction is accomplished without
derating of any performance advantages.
°
C.
Preconditioning for Power and Voltage Ratings
are for continuous duty.
stress voltage levels applied during the manufacturing
process to provide for stable resistor performance even
under momentary overload conditions.
listed in the table may be specified by adding "-15" to the
model number (Example: MG750-15).
and overvoltage ratings do not apply to the "-15" resistors.
Resistance ranges for "-15" resistors shown in the table are
from "-15 Min." to "Standard Max."
Non-Inductive Performance
Non-Inductive Design which uses a serpentine resistive
pattern that provides for neighboring lines to carry current in
opposite directions, thereby achieving maximum cancellation
of flux fields over the entire length of the resistor.
efficient non-inductive construction is accomplished without
derating of any performance advantages.
C.
C.
°
°
(8.89 �1.02)
(2.39 �.38)
(2.77 �.64)
(2.39 �.38)
(2.39 �.38)
(2.39 �.38)
(3.56 �.76)
(3.81 �.76)
(3.56 �.76)
(3.56 �.76)
(6.10 �.76)
(3.56 �.76)
(6.10 �.76)
(3.56 �.76)
(6.10 �.76)
(8.00 �.76)
(6.10 �.76)
(8.00 �.76)
(6.10 �.76)
(8.00 �.76)
(8.00 �.76)
(8.00 �.76)
(8.00 �.76)
(8.89 �1.02)
(2.39 �.38)
(2.77 �.64)
(2.39 �.38)
(2.39 �.38)
(2.39 �.38)
(3.56 �.76)
(3.81 �.76)
(3.56 �.76)
(3.56 �.76)
(6.10 �.76)
(3.56 �.76)
(6.10 �.76)
(3.56 �.76)
(6.10 �.76)
(8.00 �.76)
(6.10 �.76)
(8.00 �.76)
(6.10 �.76)
(8.00 �.76)
(8.00 �.76)
(8.00 �.76)
(8.00 �.76)
C.
.
.350 �.040
Precision
.094 �.015
.109 �.025
.094 �.015
.094 �.015
.094 �.015
.140 �.030
.150 �.030
.140 �.030
.140 �.030
.240 �.030
C.
.140 �.030
.240 �.030
.140 �.030
.240 �.030
.315 �.030
.240 �.030
.315 �.030
.240 �.030
.315 �.030
.315 �.030
.315 �.030
.315 �.030
.350 �.040
.094 �.015
.109 �.025
.094 �.015
.094 �.015
.094 �.015
.140 �.030
.150 �.030
.140 �.030
.140 �.030
.240 �.030
.140 �.030
.240 �.030
.140 �.030
.240 �.030
.315 �.030
.
.240 �.030
.315 �.030
.240 �.030
.315 �.030
.315 �.030
.315 �.030
.315 �.030
(8.89 ±1.02)
Resistor Value:
(2.39 ±.38)
(2.77 ±.64)
(2.39 ±.38)
(2.39 ±.38)
(2.39 ±.38)
(3.56 ±.76)
(3.81 ±.76)
(3.56 ±.76)
(3.56 ±.76)
(6.10 ±.76)
(3.56 ±.76)
(6.10 ±.76)
(3.56 ±.76)
(6.10 ±.76)
(8.00 ±.76)
(6.10 ±.76)
(8.00 ±.76)
(6.10 ±.76)
(8.00 ±.76)
(8.00 ±.76)
(8.00 ±.76)
(8.00 ±.76)
(2.39 �.38)
(2.39 �.38)
(2.77 �.64)
(2.39 �.38)
(2.39 �.38)
.350 ±.040
All power ratings and maximum operating voltage ratings
Maximum operating voltages 60% higher than the values
Most models are manufactured with Caddock's
.094 ±.015
.109 ±.025
.094 ±.015
.094 ±.015
.094 ±.015
.140 ±.030
.150 ±.030
.140 ±.030
.140 ±.030
.240 ±.030
.140 ±.030
.240 ±.030
.140 ±.030
.240 ±.030
.315 ±.030
.240 ±.030
.315 ±.030
.240 ±.030
.315 ±.030
.315 ±.030
.315 ±.030
.315 ±.030
All power ratings and maximum operating voltage ratings
Maximum operating voltages 60% higher than the values
Most models are manufactured with Caddock's
.094 �.015
.109 �.025
.094 �.015
.094 �.015
.094 �.015
All power ratings and maximum operating voltage ratings
Maximum operating voltages 60% higher than the values
Most models are manufactured with Caddock's
Preconditioning for Power and Voltage Ratings
for continuous duty.
voltage levels applied during the manufacturing process to
provide for stable resistor performance even under momentary
overload conditions.
listed in the table may be specified by adding "-15" to the model
number (Example: MG750-15).
overvoltage ratings do not apply to the "-15" resistors.
Resistance ranges for "-15" resistors shown in the table are from
"-15 Min." to "Standard Max."
Non-Inductive Performance
Inductive Design which uses a serpentine resistive pattern that
provides for neighboring lines to carry current in opposite
directions, thereby achieving maximum cancellation of flux fields
over the entire length of the resistor. This efficient non-inductive
construction is accomplished without derating of any
performance advantages.
All power ratings and maximum operating voltage ratings
Maximum operating voltages 60% higher than the values
Most models are manufactured with Caddock's
B
B
°
B
°
B
C.
C.
All power ratings and maximum operating voltage ratings are
Maximum operating voltages 60% higher than the values
Most
MP915, MP925, and MP930
Standard Resistance Values:
MP916 Standard Resistance Values:
Tolerance MP916 ±5% Standard (20% is available).
0.010 Ω 5%
0.015 Ω 5%
Tolerance MP915, MP925, and MP930 ±1% Standard - except
as noted. (5%, and 20% are available for most resistance values).
MP9100 Standard Resistance Values:
0.050 Ω
0.075 Ω
For custom resistance values and tolerances contact
applications engineering
Ordering Information:
Packaging:
resistors are packaged in plastic shipping tubes,
50 pieces per tube. These resistors are available
in a 50 piece minimum quantity and in full tube
quantity increments (i.e. 50, 100, 150, etc.). The
MP9100 resistors are packaged in plastic shipping
tubes, 25 pieces per tube.
Construction of MP900 and
MP9000 Series:
The MP900 and MP9000 Series Kool-Pak
Film Resistors are constructed with Caddock's
Micronox
substrate. The terminal attachment and resistance
element geometry are configured to provide
outstanding non-inductive performance.
ceramic substrate is positioned in the molded
package such that the resistor element and terminal
attachment
encapsulated in the molded body with the other side
of the ceramic being exposed flush with the back
mounting surface of the device. This construction is
covered by one or more issued patents, also
patents pending.
Caddock's Non-inductive Serpentine Pattern
Tolerance MP9100 ±1% Standard.
:
0.020 Ω 5%
0.025 Ω 5%
0.030 Ω 5%
0.033 Ω 5%
0.040 Ω 5%
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
(1.02 �.05)
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.032 �.002
.025 �.002
.025 �.002
.040 �.002
.025 �.002
.040 �.002
.025 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.032 �.002
.025 �.002
.025 �.002
.040 �.002
.025 �.002
.040 �.002
.025 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
.040 �.002
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.81 �.05)
(.64 �.05)
(1.02 ±.05)
(.64 �.05)
(1.02 ±.05)
(.64 �.05)
(1.02 ±.05)
(.64 �.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(1.02 ±.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.81 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
.025 ±.002
.025 ±.002
.025 ±.002
.025 ±.002
.025 ±.002
.025 ±.002
.032 ±.002
Model Number:
.025 ±.002
.025 ±.002
.040 ±.002
.025 ±.002
.040 ±.002
.025 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
.040 ±.002
N
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
(.81 ±.05)
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
(.64 ±.05)
.025 �.002
.025 �.002
.025 �.002
.025 �.002
.025 �.002
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
(.64 �.05)
C
MP915, MP925, and MP930
Standard Resistance Values:
C
MP916 Standard Resistance Values:
Tolerance MP916 ±5% Standard (20% is available).
0.010 Ω 5%
0.015 Ω 5%
Tolerance MP915, MP925, and MP930 ±1% Standard - except
as noted. (5%, and 20% are available for most resistance values).
MP9100 Standard Resistance Values:
0.050 Ω
0.075 Ω
For custom resistance values and tolerances contact
applications engineering
Ordering Information:
Packaging:
resistors are packaged in plastic shipping tubes,
50 pieces per tube. These resistors are available
in a 50 piece minimum quantity and in full tube
quantity increments (i.e. 50, 100, 150, etc.). The
MP9100 resistors are packaged in plastic shipping
tubes, 25 pieces per tube.
Construction of MP900 and
MP9000 Series:
The MP900 and MP9000 Series Kool-Pak
Film Resistors are constructed with Caddock's
Micronox
substrate. The terminal attachment and resistance
element geometry are configured to provide
outstanding non-inductive performance.
ceramic substrate is positioned in the molded
package such that the resistor element and terminal
attachment
encapsulated in the molded body with the other side
of the ceramic being exposed flush with the back
mounting surface of the device. This construction is
covered by one or more issued patents, also
patents pending.
Tolerance MP9100 ±1% Standard.
MP915, MP925, and MP930
Standard Resistance Values:
MP916 Standard Resistance Values:
Tolerance MP916 ±5% Standard (20% is available).
0.010 Ω 5%
0.015 Ω 5%
Tolerance MP915, MP925, and MP930 ±1% Standard - except
as noted. (5%, and 20% are available for most resistance values).
0.020 Ω 5%
0.025 Ω 5%
0.030 Ω 5%
0.033 Ω 5%
0.040 Ω 5%
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
MP9100 Standard Resistance Values:
C
For custom resistance values and tolerances contact
applications engineering
Ordering Information:
Packaging:
resistors are packaged in plastic shipping tubes,
50 pieces per tube. These resistors are available
in a 50 piece minimum quantity and in full tube
quantity increments (i.e. 50, 100, 150, etc.). The
MP9100 resistors are packaged in plastic shipping
tubes, 25 pieces per tube.
Construction of MP900 and
MP9000 Series:
The MP900 and MP9000 Series Kool-Pak
Film Resistors are constructed with Caddock's
Micronox
substrate. The terminal attachment and resistance
element geometry are configured to provide
outstanding non-inductive performance.
ceramic substrate is positioned in the molded
package such that the resistor element and terminal
attachment
encapsulated in the molded body with the other side
of the ceramic being exposed flush with the back
mounting surface of the device. This construction is
covered by one or more issued patents, also
patents pending.
Tolerance MP9100 ±1% Standard.
0.050 Ω
0.075 Ω
C
0.020 Ω 5%
0.025 Ω 5%
0.030 Ω 5%
0.033 Ω 5%
0.040 Ω 5%
0.050 Ω
0.075 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
models
0.10 Ω
0.15 Ω
0.20 Ω
0.25 Ω
0.30 Ω
0.33 Ω
Most models are available with
®
Resistor Value:
Model Number:
resistance film fired onto a flat ceramic
Model Number:
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
Non-inductive performance
with Caddock's exclusive design
Specifications:
Resistance Tolerance:
Temperature Coefficient:
Insulation Resistance: 10,000 Megohms, min.
Overload/Overvoltage: 5 times rated power
with applied voltage not to exceed 1.5 times max-
imum continuous operating voltage for 5 seconds.
Type 1: DC Voltage
Type 2: DC Voltage or V
Thermal Shock:
Cond. C, ΔR 0.25% max.
Moisture Resistance: Mil-Std-202, Method 106,
ΔR 0.4% max.
Load Life:
voltage, not to exceed rated power.
Solderable Leads
Encapsulation: High Temperature Silicone Conformal.
Temperature Coefficient:
Thermal Shock:
Cond. C, ΔR 0.25% max.
Moisture Resistance: Mil-Std-202, Method 106,
ΔR 0.4% max.
Load Life:
voltage, not to exceed rated power.
Solderable Leads
Encapsulation: High Temperature Silicone Conformal.
Specifications:
Resistance Tolerance:
Insulation Resistance: 10,000 Megohms, min.
Overload/Overvoltage: 5 times rated power
with applied voltage not to exceed 1.5 times max-
imum continuous operating voltage for 5 seconds.
Type 1: DC Voltage
St'd with "-15" rating
Type 2: DC Voltage or V
St'd with "-15" rating
Resistance Range
areas
St'd with "-15" rating
St'd with "-15"
Resistance Range
St'd with "-15" rating
Specifications:
Resistance Tolerance:
St'd with "-15" rating
Temperature Coefficient:
Standard and
Insulation Resistance: 10,000 Megohms, min.
MP915, MP916, MP925, MP930
Overload/Overvoltage: 5 times rated power with
applied voltage not to exceed 1.5 times max-
imum continuous operating voltage for 5 seconds.
Thermal Shock:
Cond. C,
Moisture Resistance: Mil-Std-202, Method 106,
∆
Load Life:
®
voltage, not to exceed rated power.
Solderable Leads
Encapsulation:
Conformal.
Specifications:
St'd with "-15" rating
Standard and
St'd with "-15"
Resistance Range
Resistance Range
Resistance Range
Temperature Coefficient:
Resistance Range
St'd with "-15" rating
MG750 -100M - 1%
Specifications:
Resistance Tolerance:
Resistance
St'd with "-15" rating
St'd with "-15" rating
Resistor Value:
Resistance
Resistance Range
Extended Range
®
Resistance Range
Extended Range
Resistance Range
R 0.4% max.
Extended Range
St'd with "-15"
Extended Range
St'd with "-15" rating
Extended Range
Standard and
Extended Range
Resistor Value:
Extended
e-mail: sales@rhopointcomponents.com
Resistance Range
Extended
resistance film fired onto a flat ceramic
Extended Range
Extended Range
Resistance
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
Extended Range
Resistance
are
Range
MP915 - 50.0 - 1%
Range
resistance film fired onto a flat ceramic
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
Range
Extended Range
Range
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
Extended
rating
rating
0.33 Ω
0.40 Ω
0.50 Ω
0.75 Ω
1.00 Ω
1.50 Ω
2.00 Ω
2.50 Ω
3.00 Ω
3.30 Ω
4.00 Ω
5.00 Ω
Range
Range
Standard
Standard
Range
Standard
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
Standard
Standard
Standard
rating
Standard
Standard
web: www.rhopointcomponents.com
These ratings are based on pre-stress
Standard
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
areas
MP915, MP916, MP925, MP930
Standard
areas
These ratings are based on pre-
These ratings are based on pre-
MP915, MP916, MP925, MP930
MG
e-mail: sales@rhopointcomponents.com
on
These ratings are based on pre-
manufactured
e-mail: sales@rhopointcomponents.com
These ratings are based on pre-
MP915 - 50.0 - 1%
e-mail: sales@rhopointcomponents.com
web: www.rhopointcomponents.com
Email
∆
MP915 - 50.0 - 1%
e-mail: sales@rhopointcomponents.com
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
R 0.25% max.
web: www.rhopointcomponents.com
web: www.rhopointcomponents.com
Web
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
Hurst Green
web: www.rhopointcomponents.com
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
the
1,000 hours at +125°C at rated
3.30 Ω
4.00 Ω
5.00 Ω
7.50 Ω
8.00 Ω
10.0 Ω
12.0 Ω
15.0 Ω
1,000 hours at +125°C at rated
1,000 hours at +125°C at rated
®
on
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
•
�80 ppm/�C from -15�C to +105�C,
referenced to +25�C.
�80 ppm/�C from +25�C to +105�C,
-200 ppm/�C to +50 ppm/�C from
-15�C to +25�C.
�80 ppm/�C from -15�C to +105�C,
referenced to +25�C.
�80 ppm/�C from +25�C to +105�C,
-200 ppm/�C to +50 ppm/�C from
-15�C to +25�C.
on
Riverside, California 92507-2364
Riverside, California 92507-2364
±80 ppm/°C from +25°C to +105°C,
-200 ppm/°C to +50 ppm/°C from
-15°C to +25°C.
•
±80 ppm/°C from -15°C to +105°C,
referenced to +25°C.
sales@rhopointcomponents.com
www.rhopointcomponents.com
substrate
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
the
High Temperature Silicone
Type
Mil-Std-202, Method 107,
Mil-Std-202, Method 107,
Sales and Corporate Office
Note that overload and
®
50.0 Ω
56.0 Ω
75.0 Ω
100 Ω
120 Ω
150 Ω
200 Ω
250 Ω
300 Ω
330 Ω
400 Ω
470 Ω
�1%, �0.5%, �0.25%, �0.1%
Mil-Std-202, Method 107,
Sales and Corporate Office
�1%, �0.5%, �0.25%, �0.1%
the
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
500 Ω
560 Ω
750 Ω
1.00 K
1.50 K
2.00 K
2.50 K
3.00 K
3.30 K
4.00 K
5.00 K
7.50 K
±1%, ±0.5%, ±0.25%, ±0.1%
Overload/Overvoltage, �R
Overload/Overvoltage, ∆R
Overload/Overvoltage, �R
®
rms
rms
�1%, �0.5%, �0.25%, �0.1%
20.0 Ω
25.0 Ω
27.0 Ω
30.0 Ω
33.0 Ω
40.0 Ω
47.0 Ω
50.0 Ω
TC Specifications
56.0 Ω
75.0 Ω
TC Specifications
Tolerance
100 Ω
TC Specifications
•
Note that overload
Note that overload
TC Specifications
AC
Fax: +44 (0)1883 712938
AC
substrate
with
Tolerance
Note that overload
Tel: +44 (0)1883 717988
Fax: +44 (0)1883 712938
Phone: (951) 788-1700
Note that overload
Surrey
Phone: (951) 788-1700
27.1 IL102.0802
Tel: +44 (0)1883 717988
substrate
®
Load Life, �R
Page 1 of 2
Load Life, �R
1717 Chicago Avenue
Load Life, ∆R
1717 Chicago Avenue
0.5% max.
0.8% max.
500 Ω
560 Ω
750 Ω
1.00 K
1.50 K
2.00 K
2.50 K
3.00 K
3.30 K
4.00 K
5.00 K
7.50 K
0.5% max.
0.8% max.
0.5% max.
0.8% max.
0.8% max.
0.5% max.
0.8% max.
0.8% max.
Tolerance
0.5% max.
0.8% max.
0.8% max.
Tolerance
Power
Fax: (951) 369-1151
0.5% max.
0.8% max.
Fax: (951) 369-1151
10.0 K
15.0 K
20.0 K
25.0 K
30.0 K
33.0 K
40.0 K
47.0 K
50.0 K
56.0 K
68.0 K
75.0 K
82.0 K
100 K
Tolerance
500 Ω
560 Ω
750 Ω
1.00 K
1.50 K
2.00 K
2.50 K
3.00 K
3.30 K
4.00 K
5.00 K
7.50 K
56.0 Ω
75.0 Ω
Tolerance
100 Ω
Tolerance
N/A
�1%
�1%
N/A
�1%
�1%
The
56.0 Ω
75.0 Ω
are
Tolerance
100 Ω
Caddock's Non-
±1%
±1%
N/A
�1%
�1%
27.1 IL102.0802
•
®
Page 1 of 2
27.1 IL102.0802
RH8 9AX
Power
®
Page 1 of 2
10.0 K
15.0 K
20.0 K
25.0 K
30.0 K
33.0 K
40.0 K
47.0 K
50.0 K
56.0 K
68.0 K
75.0 K
82.0 K
100 K
Page 1 of 2
Page 2 of 2
28_IL110.1004
28_IL110.1004
Power
The
10.0 K
15.0 K
20.0 K
25.0 K
30.0 K
33.0 K
40.0 K
47.0 K
50.0 K
56.0 K
68.0 K
75.0 K
82.0 K
100 K
are
Page 1 of 2
Page 1 of 2
The
IL-110.0201
are
Page 1 of 2
IL-110.019
Page 1 of 2
This
This
This
•
This
UK
Related parts for MP915
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Manufacturer:
RHOPOINT COMPONENTS
Datasheet:
Part Number:
Description:
Manufacturer:
RHOPOINT COMPONENTS
Datasheet:
Part Number:
Description:
Manufacturer:
RHOPOINT COMPONENTS
Datasheet:
Part Number:
Description:
Pat Series, Rat Series, High-precision Chip Attenuators
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Rg Series, Ultra-precision & Ultra-reliability Metal Film Chip Resistors
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Type Usf Ultra-stable Low Tc Film Resistors
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Ultra-precision Resistor Transfer Molded
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Passive-input Digital Isolators ? Cmos Outputs
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
TMR Angle Sensor
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Four Channel Sensor Computer Interface Modules
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Type Mg Precision High Voltage Resistors
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Sa Series, High-precision Pt-film Thermal Sensors.
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Japanese Equivalent Jfet Types
Manufacturer:
Rhopoint Components
Datasheet:
Part Number:
Description:
Irn, Uln, Irf, Ulf Slim Profile Wire Wound, Metal Clad Resistors
Manufacturer:
Rhopoint Components
Datasheet:
MP915 Summary of contents
Page 1
... Tolerance MP915, MP925, and MP930 ±1% Standard - except Maximum operating voltages 60% higher than the values as noted. (5%, and 20% are available for most resistance values). Tolerance MP915, MP925, and MP930 ±1% Standard - except These ratings are based on pre- as noted. (5%, and 20% are available for most resistance values). ...
Page 2
... Min." to "Standard Max." mounted and under electrical load. Without a heat sink, when in free air at +25°C, the MP915 is rated for 1.25 model number (Example: MG750-15). Non-Inductive Performance watts, the MP916, MP925, MP930 are rated for 2.25 and overvoltage ratings do not apply to the " ...