556882-2 TE Connectivity, 556882-2 Datasheet - Page 2

• Manufacturer Part Number: 556882-2
• Description: Power to the Board RCPT ASY R/A WTB 2 POS
• Manufacturer: TE Connectivity

Specifications of 556882-2

• Contact Gender: Socket (Female)
• Number Of Positions / Contacts: 2
• Mounting Style: PCB
• Termination Style: Wire
• Contact Plating: Tin Lead
• Contact Material: Copper Alloy
• Housing Material: Polyphenylene Sulfide
• Product Type: Connector
• Connector Type: Connector Assembly
• Pcb Mounting Orientation: Right Angle
• Make First / Break Last: No
• Pcb Mount Retention: Without
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Alignment: Without
• Sealed: No
• Ul File Number: E28476
• Csa File Number: LR 7189
• Mating Retention Type: Latching
• Vde Tested: No
• Contact - Rated Current (a): 35
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Tail Length (mm [in]): 4.9 [0.192]
• Tail Orientation: In-line
• Profile Height (y-axis) (mm [in]): 14.48 [0.5701]
• Mating Retention: With
• Number Of Positions: 2
• Centerline (mm [in]): 11.18 [0.440]
• Number Of Rows: 1
• Length (x-axis) (mm [in]): 46.736 [1.840]
• Width (z-axis) (mm [in]): 17.53 [0.690]
• Contact Base Material: Copper Alloy
• Contact Type: Pin/Socket
• Contact Design: Dual Beam
• Contact Plating, Mating Area, Material: Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 3.81 [150]
• Tail Plating Material: Tin
• Tail Plating, Thickness (µm [?in]): 2.54 [100]
• Connector Style: Receptacle
• Housing Color: Black
• Mating Alignment: With
• Mating Alignment Type: Polarization
• Ul Flammability Rating: UL 94V-0
• Custom Configurable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 600
• Csa Certified: Yes
• Operating Temperature (°c [°f]): 0 – 105 [32 – 221]
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 – 3.18 [0.062 – 0.1251]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Power
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: Details

3.3.
3.4.
3.5.
Rev A
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Vibration, sinusoidal.
Mechanical shock, specified pulse.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 600 volts alternating current (rms)
Current: See Figure 4 for applicable current carrying capability
Temperature: 0 to 105° C
Meets requirements of product
drawing and Application
Specification 114-6044.
∆R 1 milliohm maximum.
5000 megohms minimum.
2200 vac at sea level.
1 minute hold with no breakdown or
flashover.
30° C maximum temperatur e rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-1.
Subject samples to 50 mv
maximum open circuit at 100 ma
maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
mated samples.
TE Spec 109-29-1.
Test between adjacent contacts of
mated samples.
TE Spec 109-45-1.
Measure temperature rise vs
current.
See Figures 4 and 5.
TE Spec 109-21-1.
Subject mated samples to 10-55-
10 Hz traversed in 1 minute with
.06 inch maximum excursion. 2
hours in each of 3 mutually
perpendicular planes.
See Figure 6.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 6.
Procedure
108-1349
2 of 7