ISD1112SR Nuvoton Technology Corporation of America, ISD1112SR Datasheet - Page 24

IC VOICE REC/PLAY 12-SEC 28-SOIC

ISD1112SR

Manufacturer Part Number
ISD1112SR
Description
IC VOICE REC/PLAY 12-SEC 28-SOIC
Manufacturer
Nuvoton Technology Corporation of America
Series
ISD1100r
Datasheet

Specifications of ISD1112SR

Interface
Pushbutton
Filter Pass Band
2.2kHz
Duration
12 Sec
Mounting Type
Surface Mount
Package / Case
28-SOIC (0.300", 7.50mm Width)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Functional Description Example
The following operating sequence example demonstrates the functionality of the ISD1100 series.
1. Record a message:
2. Edge-activated playback:
3. Level-activated playback:
4. Record (interrupting playback).
5.
Pulling the REC signal LOW initiates a record cycle from current location. When REC is
held LOW, the recording continues. Until the memory array is filled up or when REC is
pulled HIGH, recording ceases. An EOM marker is written at the end of message. Then the
device will automatically power down.
Pulling the PLAYE signal LOW initiates a playback cycle from the beginning of the message
until the entire message is played. The rising edge of PLAYE has no effect on operation.
When the EOM marker is encountered, the device automatically powers down. A subsequent
falling edge on PLAYE initiates a new playback operation from the beginning of the
message.
Holding the PLAYL signal LOW initiates a playback cycle from the beginning of the
message, until PLAYL is pulled HIGH or when the EOM marker is encountered, playback
operation stops and the device automatically powers down.
The REC signal takes precedence over playback operation. Holding REC LOW initiates a
new record operation from current location, regardless of any current operation in progress.
During record, the RECLED output pin provides an active-LOW signal, which can be used to
drive an LED as a “record-in-progress” indicator. It returns to a HIGH state when the REC
pin is pulled HIGH or when the recording is completed due to the memory being filled.
However, during playback, this pin also pulses LOW to indicate an EOM at the end of a
message.
RECLED operation.
- 24 -
ISD1100 SERIES

Related parts for ISD1112SR