FT2232HL - TRAY FTDI, Future Technology Devices International Ltd, FT2232HL - TRAY Datasheet - Page 63

• Manufacturer Part Number: FT2232HL - TRAY
• Description: IC USB UART/FIFO DUAL HS 64LQFP
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: USBmadeEZ-FIFOr

Specifications of FT2232HL - TRAY

• Features: USB to UART and/or FIFO, SPI, I2C, JTAG
• Number Of Channels: 2, DUART
• Fifo's: 4096 Byte
• Protocol: RS-232, RS-422, RS-485
• Voltage - Supply: 3 V ~ 3.6 V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FT2232HL - TRAY

Revision History
Version draft
Version Preliminary
Version 1.00
Version 1.10
Version 2.00
Version 2.01
Version 2.02
Version 2.03
Version 2.04
Version 2.05
Version 2.06
Version 2.07
Version 2.08
Version 2.09
Version 2.10
Appendix B – Revision History
Copyright © 2010 Future Technology Devices International Limited
Datasheet Released
QFN Package updated
Various Updates
Corrections made to table 3.6, 3.7, table on page 8.
Changed description of WRSTRB# and RDSTRB#
Added note that HBE mode only operates at 60MHz
Corrections made to tray QFN 160 changed to 260
Correction made to 3.4.2, falling changed to rising
Corrections made to TxLED and RxLED pin connections
Corrected signals in Figure 4.16.
Corrected signal names in Fig 2.1
Added reference to AN_108, AN_109, AN_110, AN_111 and AN_113.
Added paragraph on latency timer to section 4.1
Corrected Figures 6.2, 6.3 an 6.4 – missing regulators and better way 17
of holding self powered designs in reset if not connected to USB.
Corrected Max DC inputs on “DC Input Voltage –
“All Other Inputs” pins from VCORE+0.5V to VCCIO+0.5V
Added
Added explanation of MPSSE Adaptive clocking (4.6.1).
Corrected 12MHz crystal specification.
Added # to TXLED, RXLED on table 3.4.
Corrected TX_LED and RX_LED connections on Fig 4.1
Edited Table 3.11, references AN2232L-1 to AN_108
Updated and formatted contact information.
Corrected TOC.
Added TID number
Added
Corrected
Edited table 4.1 (T8 and T13 Comments)
Edited section 4.7.1 and 4.7.2
Section 4.12, added clarifications about Wake up
11 Mbaud.
Updated section 4.5, FT245 Asynchronous FIFO
Interface timing diagram.
Edited section 4.3.2, 4.3.3, figure 4.2 and 4.3.
Initial Datasheet Created
Preliminary Datasheet Released
Clarified unsupported baud rates of 7,9,10 and
ESD specifications
explanation of SIWU (4.12)
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
„WR‟ to „WR#‟ throughtout the datasheet
(
Section 1.3)
Document No.: FT_000061
Clearance No.: FTDI#77
Datasheet Version 2.10
October 2008
23
4
November 2008
January 2009
February 2009
March 2009
19
3
21
12 March 2010
24
2
22
th
rd
nd
th
th
st
th
rd
nd
November 2008
June 2009
Sept 2009
October 2008
May 2009
June 2009
May 2010
Sept 2010
Nov 2010
63