FT2232HQ - REEL FTDI, Future Technology Devices International Ltd, FT2232HQ - REEL Datasheet - Page 53

• Manufacturer Part Number: FT2232HQ - REEL
• Description: IC USB UART/FIFO DUAL HS 64-QFN
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: USBmadeEZ-FIFOr

Specifications of FT2232HQ - REEL

• Features: USB to UART and/or FIFO, SPI, I2C, JTAG
• Number Of Channels: 2, DUART
• Fifo's: 4096 Byte
• Protocol: RS-232, RS-422, RS-485
• Voltage - Supply: 3 V ~ 3.6 V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 768-1025-2; FT2232HQ - REEL

6.3 Oscillator Configuration
Figure 6.5 Recommended FT2232H Crystal Oscillator Configuration.
Figure 6.5 illustrates how to connect the FT2232H with a 12MHz ± 0.003% crystal. In this case loading
capacitors should to be added between OSCI, OSCO and GND as shown. A value of 27pF is shown as the
capacitor in the example – this will be good for many crystals but it is recommended to select the loading
capacitor value based on the manufacturer‟s recommendations wherever possible. It is recommended to
use a parallel cut type crystal.
It is also possible to use a 12 MHz Oscillator with the FT2232H. In this case the output of the oscillator
would drive OSCI, and OSCO should be left unconnected. The oscillator must have a CMOS output drive
capability.
Table 6.1 OSCI Input characteristics
Parameter
Crystal
OSCI Vin
12MHz
FIn
Ji
27pF
27pF
Cycle to cycle jitter
Input Frequency
Input Voltage
Description
Copyright © 2010 Future Technology Devices International Limited
2
3
OSCI
FT2232H
OSCO
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
Minimum
2.97
Typical
< 150
3.30
12
Maximum
3.63
Document No.: FT_000061
Units
MHz
pS
V
Clearance No.: FTDI#77
Datasheet Version 2.10
+/- 30ppm
Conditions
53