MCP2200-I/MQ Microchip Technology, MCP2200-I/MQ Datasheet - Page 8

• Manufacturer Part Number: MCP2200-I/MQ
• Description: IC USB TO UART 20QFN
• Manufacturer: Microchip Technology
• Type: USB to UART Protocol Converterr

Specifications of MCP2200-I/MQ

• Package / Case: 20-VQFN Exposed Pad
• Features: USB to UART
• Number Of Channels: 8
• Fifo's: 256 Byte
• Protocol: USB 2.0
• Voltage - Supply: 3 V ~ 5.5 V
• With Auto Flow Control: Yes
• Mounting Type: Surface Mount
• Mounting Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current: 13 mA
• Operating Supply Voltage: 3 V to 5.5 V
• Usb Version: 2.0
• Data Rate: 12Mbps
• Supply Voltage Range: 3V To 5.5V
• Digital Ic Case Style: QFN
• No. Of Pins: 20
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP2200
2.0
The MCP2200 is configured by writing special
commands using the HID interface. Configuration can
be achieved using the configuration utility provided by
Microchip. Alternatively, a custom utility can be
developed by using the DLL available on the MCP2200
product page.
TABLE 2-1:
DS22228A-page 8
Vendor ID (0x04D8)
Product ID (0x00DF)
Baud Rate
IO Config
IO Default
Tx/Rx LEDs
Hardware Flow Control
USBCFG Pin
Suspend Pin
Invert Sense
Manufacturer String
Product String
Configuration Name
CONFIGURATION
CONFIGURATION DESCRIPTIONS
The USB vendor identification assigned to Microchip by the USB consortium.
can assign a custom PID by request.
section for details on setting non-primary baud rates.
Pins are active low when configured as traffic indicators.
Enables/disables CTS and RTS flow control.
USB manufacturer string.
USB product string.
Device ID assigned by Microchip. The device can be used “as-is”, or Microchip
Sets the UART baud rate using a list of primary baud rates. See the UART
Individually configures the I/O to inputs or outputs.
Individually configures the output default state for pins configured as outputs.
Enables/disables the GP6 and GP7 pins to function as USB traffic indicators.
Enables/disables the GP1 pin as a USB configuration status indicator.
Enables/disables the GP0 pin as a USB suspend status pin.
Enables/disables the UART lines states:
- Normal – Tx/Rx idle high; CTS/RTS active low
- Inverted – Tx/Rx idle low; CTS/RTS active high
2.1
A configuration utility is provided by Microchip to allow
the user to configure the MCP2200 to custom defaults.
The Configuration Utility
device’s HID interface where all of the configurable
features can be set.
2.2
The MCP2200 is supplied from the factory with a
serialized USB serial string.
Description
Configuration Utility
Serial String
 2010 Microchip Technology Inc.
(Figure
2-1) connects to the