X25ART FCI, X25ART Datasheet - Page 44

• Manufacturer Part Number: X25ART
• Manufacturer: FCI

Specifications of X25ART

• Lead Free Status / Rohs Status: Supplier Unconfirmed

N-44
TYPE KOMPRESSOR™
LPHY46
REMOTE OPERATED 15 TON
LOW PRESSURE HYDRAULIC
COMPRESSION TOOL
The BURNDY
a compact, low pressure, hydraulic 15 ton
crimping tool. The LPHY46 is double acting
for hydraulic ram advance and retract. The
KOMPRESSOR™ also has an industry
exclusive spring back up for ram retraction in
case of loss of hydraulic pressure. The
LPHY46 comes equipped with an ergonomic
handle designed for better balance, which
helps lessen fatigue to the operator.
The LPHY46 KOMPRESSOR™ features the
BURNDY
ing capable of using all industry standard
BURNDY
PUADP-1 adapter. The LPHY46 has a visual
and audible crimp indicator that assures
properly completed crimps with 15 tons of
force.
The LPHY46 is powered directly from open
center or closed center hydraulic tool circuits
present on most utility line trucks or can be
operated
hydraulic power units. The LPHY46 can be
switched from open center to closed center
operation with a simple external adjustment.
The LPHY46 does not require any additional
tooling such as boosters, intensifiers, or hand
controls in the bucket. Five-year limited
warranty.
Release Buttons
Style “P” Dies or
Y46 Tool Head
for BURNDY
Exposed Die
“U” Dies with
Adapter
350° Head Rotation
®
®
Y46 tool head with a 2 jaw open-
from
Lifting Eyes
“P” dies, and “U” dies, with
®
®
LPHY46 KOMPRESSOR™ is
individual
Large 2 Jaw Opening
BURNDY
Tooling
low-pressure
15 Tons of Output Force
BENEFITS
• Visual and audible crimp indicator assures
• Covers a wide range of applications with
• 350 head rotation for versatile tool head
• Uses all standard BURNDY
• Operates on open center or closed center
• Ergonomic handle design for better
• Double acting tool for hydraulic ram
• Spring back up for ram retraction if
• 5-year limited warranty.
Variable Speed Trigger
properly completed crimps with 15 tons of
force.
its 2 jaw opening.
positioning allowing the user to get into
tight areas easier.
“U” dies with PUADP-1 adapter.
hydraulic systems.
balance and helps lessen fatigue.
advance and retraction.
hydraulic system shuts down.
Ergonomically Balanced Tool
and Handle Design
®
Products
Visual Crimp
®
Closed Center
Open Center,
Indicator
Adjustment
“P” dies, and
SPECIFICATIONS
LPHY46
FOR USE ON
CONNECTOR
TYPE
Copper
#8-AWG str. -
1500 kcmil
Code Cable
Navy Cables
Flexible and
Extra Flexible
1/2 -1 Ground
Rods
Aluminum
#8 AWG-
1250 kcmil
Code Cables
ACSR
ACCESSORIES
Cat No.
“U” - Die adapter
Cat No. P15K
Cutter die (max. 1.2 dia.)
Hoses:
Cat No. LPHTHOSNCR66668OP
Direct connect 8 non-conductive hose set
Cat No. LPHTHOSNCR666610OP
Direct connect 10 non-conductive hose set
*Cat No.
8 non-conductive hose set
*Cat No.
10 non-conductive hose set
Hydraulic Fittings:
Cat No.
Male coupler 3/8 HTMA
Cat No.
Female coupler 3/8 HTMA
Cat No.
Swivel Adapter
*These hoses are used with the
LPHTADPSMFOP66 swivel adapter.
Max. Back Pressure: 250 psi (17 BAR)
Operating Pressure: 1,550-2,500 psi
Force Developed: 15 Tons
Overall Length: 18 in (465 mm)
PUADP-1
LPHTHTMANOSE66
LPHTHTMABODY66
LPHTADPSMFOP66
LPHTHOSNCR66668
LPHTHOSNCR666610
Crimp Time: Approximately
Flow Rate: 3-9 GPM (11-34 LPM)
Weight: 28.5 lbs (13 kg)
Width: 6 in (153 mm)
CONDUCTOR
RANGE
Terminals-grounding to 500 kcmil
Terminals-Uninsulated #8 to
Terminals-Insulated #8 to 2/0
Splices #8 to 1500 kcmil
Taps
Taps-Grounding to 500 kcmil
Terminals
Splices
Taps
See Burndy Overhead
YGA, YGHA, YGF
1500 kcmil YA, YA-2N, YA-L
YA-LB, YA-TC, YA-2LN, YAB-4N
YAV-L Box, YAV-L,
YAV-RS Box, YAV-RS,
YA-TC-FX
YAEV-L Box, YAEV-L,
YAEV-H, YAEV-RS, YAEV-RH
YS, YS-T, YS-L, YS-LB, YST,
YSP-T, YGS, YGHS
YH, YCHC #14 to 1000 kcmil
YC-C to 4/0 AWG
YGHC-C, YGHP-C, YGHR-C
YA-A, AYP, AYPO
YS-A, YS-AT, YRB
YFD, YFN, YFO, YFR
Transmission and Distribution
Catalog Module
(107-172 BAR)
2 seconds