5962-3870702MPA Maxim Integrated Products, 5962-3870702MPA Datasheet - Page 3

• Manufacturer Part Number: 5962-3870702MPA
• Description: Charge Pump INV/STPUP -9.4V to -10V 8-Pin CDIP
• Manufacturer: Maxim Integrated Products

Specifications of 5962-3870702MPA

• Package: 8CDIP
• Function: Inverting/Step Up
• Output Voltage: -9.4 to -10 V
• Operating Temperature: -55 to 125 °C

QUALITY ASSURANCE
Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in Mil-
Std-883.
Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:
Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B,
C, and D inspection.
Group A inspection:
Group C and D inspections:
a. End-point electrical parameters shall be specified in Table 1.
b. Steady-state life test, Method 1005 of Mil-Std-883:
TABLE 2.
----------------------------
1. Test Condition, A, B, C, or D.
2. TA = +125 C minimum.
3. Interim and final electrical test requirements shall be specified in Table 2.
1. Tests as specified in Table 2.
2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.
1. Test condition A, B, C, D.
2. TA = +125 C, minimum.
3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
Group C and D End-Point Electrical Parameters
*
PDA applies to Subgroup 1 only.
Mil-Std-883 Test Requirements
Group A Test Requirements
Interim Electric Parameters
Final Electrical Parameters
Method 5004
Method 5005
Method 5005
Method 5005
Electrical Characteristics of ICL7660AMxx/883B
for /883B and SMD 5962-3870702
ELECTRICAL TEST REQUIREMENTS
per Method 5005, Table 1
Subgroups
1*, 2, 3
1, 2, 3
1
1
Page 4 of
19-0161
Rev. D
5