LMX9830SM National Semiconductor, LMX9830SM Datasheet - Page 37

• Manufacturer Part Number: LMX9830SM
• Manufacturer: National Semiconductor

Specifications of LMX9830SM

• Lead Free Status / Rohs Status: Not Compliant

14.2 SCENARIO 2: AUTOMATIC POINT-TO-POINT
CONNECTION
LMX9830 at both sides.
Example: Serial Cable Replacement.
Device #1 controls the link setup with a few commands as
described.
If step 5 is executed, the stored default device is connected
(step 4) after reset (in Automatic mode only) or by sending the
FIGURE 17. Automatic Point-to-Point Connection
37
command “Connect to Default Device”. The command can be
sent to the device at any time.
If step 6 is left out, the microcontroller has to use the com-
mand “Send Data” instead of sending data directly to the
module.
www.national.com
20180025