SC1200UFH-266 AMD (ADVANCED MICRO DEVICES), SC1200UFH-266 Datasheet - Page 118

• Manufacturer Part Number: SC1200UFH-266
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of SC1200UFH-266

• Operating Temperature (min): 0C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

118
Offset 00h
This register is set to 00h on power-up of V
6.2.9.4 "Power Management Events" on page 160.)
Offset 01h
This register is set to 03h on power-up of V
ACPI controller and/or a PME to the Core Logic module. (See Section 6.2.9.4 "Power Management Events" on page 160.)
Offset 02h
This register is set to 00h on power-up of V
Bit
4:2
4:2
7:5
1:0
7
6
5
1
0
7
6
5
1
0
4
3
2
Description
Reserved.
Reserved. Must be set to 0.
IRRX1 (CEIR) Event Status. This sticky bit shows the status of the CEIR event detection.
0: Event not detected. (Default)
1: Event detected.
Reserved.
RI2# Event Status. This sticky bit shows the status of RI2# event detection.
0: Event not detected. (Default)
1: Event detected.
SDATA_IN2 Event Status. This sticky bit shows the status of Audio Codec event detection.
0: Event not detected. (Default)
1: Event detected.
Reserved.
Reserved. Must be set to 0.
IRRX1 (CEIR) Event Enable.
0: Disable. (Default)
1: Enable.
Reserved.
RI2# Event Enable.
0: Disable.
1: Enable. (Default)
SDATA_IN2 Event Enable.
0: Disable.
1: Enable. (Default)
Reserved.
Reserved. Must be set to 0.
Reserved. Must be set to 0.
Reserved.
Configuration Bank Select Bits.
00: Only shared registers are accessible.
01: Shared registers and Bank 1 (CEIR) registers are accessible.
10: Bank selected.
11: Reserved.
Table 5-29. Banks 0 and 1 - Common Control and Status Registers
32579B
Wakeup Events Status Register - WKSR (R/W1C)
Wakeup Configuration Register - WKCFG (R/W)
Wakeup Events Control Register - WKCR (R/W)
PP
PP
PP
or software reset. Detected wakeup events that are enabled issue a power-up request the
or software reset. It indicates which wakeup event and/or PME occurred. (See Section
or software reset. It enables access to CEIR registers.
AMD Geode™ SC1200/SC1201 Processor Data Book
Reset Value: 00h
Reset Value: 03h
Reset Value: 00h
SuperI/O Module