LM3526MX-H National Semiconductor, LM3526MX-H Datasheet - Page 9

• Manufacturer Part Number: LM3526MX-H
• Manufacturer: National Semiconductor

Specifications of LM3526MX-H

• Usb Power Switch Type: High Side Switch
• Short Circuit Current Limit: 2.2A
• Input Voltage Range: 2.7 to 5.5V
• Number Of Switches: Dual
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 8
• Package Type: SOIC N
• Lead Free Status / Rohs Status: Not Compliant

Application Information
PCB LAYOUT CONSIDERATIONS
In order to meet the USB requirements for voltage drop,
droop and EMI, each component used in this circuit must be
evaluated for its contribution to the circuit performance. The
PCB layout rules and guidelines must be followed.
• Place the switch as close to the USB connector as pos-
sible. Keep all V
least 50-mil, 1 ounce copper for all V
bus
traces as short as possible and use at
FIGURE 2. Self-Powered Hub Per-Port Voltage Drop
bus
(Continued)
traces. Solder
9
• Avoid vias as much as possible. If vias are used, use
• Place the output capacitor and ferrite beads as close to
• If ferrite beads are used, use wires with minimum resis-
plating the traces will reduce the trace resistance.
multiple vias in parallel and/or make them as large as
possible.
the USB connector as possible.
tance and large solder pads to minimize connection
resistance.
10109723
www.national.com