B37872-K1473-K60 EPCOS Inc, B37872-K1473-K60 Datasheet - Page 34

• Manufacturer Part Number: B37872-K1473-K60
• Manufacturer: EPCOS Inc

Specifications of B37872-K1473-K60

• Capacitance: .047uF
• Tolerance (+ Or -): 10%
• Voltage: 100VDC
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Surface Mount
• Package / Case: 1206
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 3.2mm
• Product Depth (mm): 1.6mm
• Product Height (mm): 0.8mm
• Product Diameter (mm): Not Requiredmm
• Lead Free Status / Rohs Status: Compliant

Recommendations for processing
1. Ensure correct positioning of a ceramic capacitor on the solder pad.
2. Be careful when using casting, injection-molded and molding compounds and cleaning
3. Support a circuit board and reduce placement forces.
4. Do not straighten a board (manually) if it is distorted by soldering.
5. Separate boards with a peripheral saw, or preferably with a milling head (no dicing or
6. Be careful when subsequently placing heavy or leaded components (e.g. transformers or
7. When testing, transporting, packing or inserting a board, avoid any deformation of it so that
8. Avoid excessive force when plugging a connector into a device soldered onto a board.
9. Only mount ceramic capacitors using the soldering process (reflow or wave) that is
10. When soldering, select the softest solder profile possible (heating time, peak temperature,
11. Ensure the correct solder meniscus height and solder quantity.
12. Ensure correct dosing of the cement.
13. Ceramic capacitors with external silver-palladium terminations are intended for conductive
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and
Important notes at the end of this document.
agents. They can damage a capacitor.
breaking).
snap-in components) because of the danger of bending and fracture.
components are not damaged.
permissible for them (see chapter “Soldering directions”).
cooling time) to avoid thermal stress and damage.
adhesion - they are not suited for lead-free soldering processes.
Page 23 of 26
Multilayer ceramic capacitors
X7R