LH28F320BFE-PBTL80 Sharp Electronics, LH28F320BFE-PBTL80 Datasheet - Page 13

• Manufacturer Part Number: LH28F320BFE-PBTL80
• Manufacturer: Sharp Electronics

Specifications of LH28F320BFE-PBTL80

• Cell Type: NOR
• Density: 32Mb
• Access Time (max): 80ns
• Interface Type: Parallel
• Boot Type: Bottom
• Address Bus: 21b
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 2M
• Supply Current: 25mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / Rohs Status: Not Compliant

8. If the program operation in one partition is suspended and the erase operation in other partition is also suspended, the
9. Full chip erase and OTP program operations can not be suspended. The OTP Program command can not be accepted while
10. Following the Clear Block Lock Bit command, block which is not locked-down is unlocked when WP# is V
11. Commands other than those shown above are reserved by SHARP for future device implementations and should not be
LH28F320BF series for details.
suspended program operation should be resumed first, and then the suspended erase operation should be resumed next.
the block erase operation is being suspended.
WP# is V
used.
IH
, lock-down bit is disabled and the selected block is unlocked regardless of lock-down configuration.
LHF32F11
Rev. 2.42
IL
. When
11