5962-8764801XA QP SEMICONDUCTOR, 5962-8764801XA Datasheet - Page 3

• Manufacturer Part Number: 5962-8764801XA
• Manufacturer: QP SEMICONDUCTOR

Specifications of 5962-8764801XA

• Lead Free Status / Rohs Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
appendix A for device class M.
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
(Copies of these documents are available online at
Standardization Document Order Desk, 700 Robins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2/ Lid shall be transparent to permit ultraviolet light erasure.
3/ Must withstand the added P
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
1.3 Absolute maximum ratings.
1.4 Recommended operating conditions.
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
Storage temperature range ........................................................-65°C to +150°C
Input voltages with respect to ground.........................................-0.6 V dc to +6.25 V dc
Output voltages with respect to ground......................................-0.6 V dc to V
Voltage on pin A9 with respect to ground...................................-0.6 V dc to +13.5 V dc
V
Power dissipation (P
Lead temperature (soldering, 10 seconds).................................+300°C
Thermal resistance, junction-to-case (Θ
Junction temperature (T
Case operating temperature range (T
Supply voltage range (V
DEPARTMENT OF DEFENSE SPECIFICATION
DEPARTMENT OF DEFENSE STANDARDS
DEPARTMENT OF DEFENSE HANDBOOKS
PP
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
MIL-STD-883
MIL-STD-1835 -
MIL-HDBK-103 -
MIL-HDBK-780 -
supply voltage with respect to ground..................................-0.6 V dc to +14.0 V dc
DEFENSE SUPPLY CENTER COLUMBUS
Outline letter
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
X
Y
Z
STANDARD
-
D
) 3/..........................................................350 mW
Test Method Standard Microcircuits.
Interface Standard Electronic Component Case Outlines.
List of Standard Microcircuit Drawings.
Standard Microcircuit Drawings.
J
CC
)...........................................................+150°C
) ........................................................+4.5 V dc to 5.5 V dc
D
Descriptive designator
GDIP1-T28 or CDIP2-T28
CQCC1-N32
See figure 1
due to short-circuit test; e.g., I
C
) .....................................-55°C to +125°C
JC
) ................................See MIL-STD-1835
http://assist.daps.dla.mil/quicksearch/
OS
Terminals
.
32
32
28
SIZE
A
CC
REVISION LEVEL
+1.0 V dc
Rectangular leadless chip carrier 2/
or
"J" lead chip carrier 2/
www.dodssp.daps.mil
Package style
Dual-in-line 2/
E
SHEET
5962-87648
or from the
3