SI2457-D-FS Silicon Laboratories Inc, SI2457-D-FS Datasheet - Page 112
SI2457-D-FS
Manufacturer Part Number
SI2457-D-FS
Description
IC ISOMODEM SYSTEM-SIDE 16SOIC
Manufacturer
Silicon Laboratories Inc
Specifications of SI2457-D-FS
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
- Current page: 112 of 304
- Download datasheet (5Mb)
AN93
U70 controls escape and several indicator and detector masks and provides several read-only status bits (see
Table 73). Bits 5, 6, 7, and 14 are reserved.
Bits 4:0 are read only, and bits 15 and 13:8 are read/write. U70 resets to 0x2700 with a power-on or manual reset.
Bit 15 (HES) = 0 (default) disables the hardware escape pin.
Setting HES = 1 enables ESC. When ESC is enabled, escape from the data mode to the command mode occurs at
the rising edge of the ESC pin. Multiple escape options can be enabled simultaneously.
For example, U70 [13] (TES) = 1 by default, which enables the +++ escape. If HES is also set (HES = 1), either
escape method works. Additionally, the 9th bit escape can also be enabled with the AT\B6 command or through
autobaud.
Bit 13 (TES) = 1 (default) enables the standard +++ escape sequence. To successfully escape from data mode to
command mode using +++, there must be no UART, parallel or SPI activity (depending on the interface mode) for a
guard period determined by register S12, both before and after the +++. S12 can be set for a period ranging from
200 ms to 5.1 seconds.
Bit 12 (CIDM) = 0 (default) prevents a change in U70 [4] (CID), Caller ID, from triggering an interrupt. If CIDM = 1,
an interrupt is triggered with a low-to-high transition on CID.
Bit 11 (OCDM) = 0 (default), an interrupt is not triggered with a change in OCD. If OCDM = 1, a low-to-high
transition on U70 [3] (OCD), overcurrent detect, triggers an interrupt. This bit must be set for Australia and Brazil.
Bit 10 (PPDM) = 1 (default) causes a low-to-high transition in U70 [2] (PPD), parallel phone detect, to trigger an
interrupt. If PPDM = 0, an interrupt is not triggered with a change in PPD.
Bit 9 (RIM) = 1 (default) causes a low-to-high transition in U70 [1] (RI), ring indicator, to trigger an interrupt. If
RIM = 0, an interrupt is not triggered with a change in RI.
Bit 8 (DCDM) = 1 (default) causes a high-to-low transition in U70 [0] (DCD), data carrier detect, to trigger an
interrupt. If DCDM = 0, an interrupt is not triggered with a change in DCD.
Bits 4:0 are the event indicators described below. All are “sticky” (i.e., remain high after the event) and are cleared
upon an interrupt read command (AT:I).
112
15:13
12:8
15:8
Bit
7:5
3:0
Bit
7:0
4
Reserved Do not modify
Reserved
Reserved
Reserved
PTMR
Name
Name
HRS
R1
Parallel/SPI Port Receive FIFO Interrupt Timer (in milliseconds)
Function
Do not modify.
CLKOUT Divider (Default = 11111b)
Read returns 101b. Do not modify.
Hardware Reset
0 = Normal operation.
1 = Device will perform hardware reset. All registers will return to default settings.
Read returns 0. Do not modify.
Table 71. U6E Bit Map
Table 72. U6F Bit Map
Rev. 1.3
Function
Related parts for SI2457-D-FS
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
TSSOP 24/C°/56 KBPS, V.90 ISOMODEM SYSTEM-SIDE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
TSSOP 24/I°/56 KBPS, V.90 ISOMODEM SYSTEM-SIDE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 16SOIC
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
SMD/C°/SINGLE-ENDED OUTPUT SILICON OSCILLATOR
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A N/A/SI4010 AES KEYFOB DEMO WITH LCD RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A N/A/SI4010 SIMPLIFIED KEY FOB DEMO WITH LED RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A/-40 TO 85 OC/EZLINK MODULE; F930/4432 HIGH BAND (REV E/B1)
Manufacturer:
Silicon Laboratories Inc