SI2434-D-FT Silicon Laboratories Inc, SI2434-D-FT Datasheet - Page 74
SI2434-D-FT
Manufacturer Part Number
SI2434-D-FT
Description
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer
Silicon Laboratories Inc
Specifications of SI2434-D-FT
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
- Current page: 74 of 304
- Download datasheet (5Mb)
AN93
74
+VLS = n
+VNH = <hook
>
Command
+VGT
+VIP
+VIT
Table 39. Basic AT Command Set (Continued)
Transmit Gain Selection.
The <gain> parameter has a range of 112-134 with 128 being the
nominal value. This represents a range of -48 to 18 dB. The default
is 128 (0 dB). This command is used to control the transmit gain at
the DTE to either the Si3000 Codec or the DAA. The purpose is to
adjust the DTE transmit gain for the TAM voice stream during idle
state.
Load Voice Factory Defaults.
DTE/DCE Inactivity Timer.
The <timer> parameter has a range of 0–255 with units of sec-
onds.
The default is 0 (disable).
Analog Source / Destination Select.
n
0
1
disabled.
4
5
Tone detectors enabled.
15
20
enabled.
21
Automatic Hangup Control.
<hook>
0
1
2
Description
ISOmodem on-hook. AOUT disabled. Tone detec-
tors disabled. Si3000 sample pass-through to
DAA is inactive.
ISOmodem off-hook. AOUT disabled. Tone detectors
ISOmodem on-hook. AOUT connected to ISOmo-
dem tone generators. Tone detectors disabled.
ISOmodem off-hook. AOUT connected to PSTN.
ISOmodem goes off-hook, begins V.253 tone event
reporting and Si3000 to DAA sample pass-through
becomes active. Dial tone can be heard on handset.
ISOmodem on-hook. AOUT disabled. Tone detectors
ISOmodem on-hook. AOUT connected to ISOmo-
dem tone generators. Tone detectors enabled.
Hook control description
The ISOmodem retains automatic hangups as
is normal in the other modes (such as hanging
up the phone when the ISOmodem does not
detect a data carrier with a given time interval).
The ISOmodem shall disable automatic hangups
in the other non-voice modes.
The ISOmodem shall disable all hang-ups in other
non-voice modes. The ISOmodem shall only per-
form a “logical” hangup (return the OK result
code).
Rev. 1.3
Action
Related parts for SI2434-D-FT
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
SOIC 16/C°/33.6 KBPS ISOMODEM 16-PIN SYSTEM-SIDE - LEAD-FREE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
TSSOP 24/I°/33.6 KBPS ISOMODEM SYSTEM-SIDE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
SOIC 16/C°/33.6 KBPS ISOMODEM 16-PIN SYSTEM-SIDE - LEAD-FREE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Modem Chip Chipset 33.6Kbps 16-Pin SOIC
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Modem Chip Chipset 33.6Kbps 24-Pin TSSOP T/R
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 16SOIC
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Telecom ICs CONTACT SILICON LABS FOR AVAILABILITY
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
SMD/C°/SINGLE-ENDED OUTPUT SILICON OSCILLATOR
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A N/A/SI4010 AES KEYFOB DEMO WITH LCD RX
Manufacturer:
Silicon Laboratories Inc
Datasheet: