DSO6032A-GSA AGILENT TECHNOLOGIES, DSO6032A-GSA Datasheet - Page 24

• Manufacturer Part Number: DSO6032A-GSA
• Description: 69R7191
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of DSO6032A-GSA

• Scope Bandwidth: 300 MHz
• Scope Type: Digital Bench
• Scope Channels: 2 Scope
• Bandwidth: 300MHz
• Meter Display Type: XGA LCD
• Sampling Rate: 2GSPS
• Input Impedance: 1Mohm
• Rise Time: 1.17ns
• Input Voltage: 400V P-p
• Rohs Compliant: NA

Performance characteristics
General characteristics (continued)
Trigger out
10 MHz ref in/out
Kensington lock
Power requirements
Line voltage range
Line frequency
Power usage
Battery option – BAT
Environmental characteristics
Ambient temperature
Humidity
Altitude
Vibration
Shock
Pollution degree
Indoor use
Other
Measurement categories
Supplementary information
*
24
Source Frequency/8 is supported on 300 MHz to 1 GHz 6000 Series only.
When Triggers is selected (delay ~17 ns)
When Source Frequency or Source Frequency/8* is selected
Max frequency output: 350 MHz (in source frequency mode when terminated in 50 Ω)
TTL out, 180 mV to 1 V amplitude with 0 to 2 V offset
Connection on rear panel for security
100-120 V, 50/60/400 Hz; 100-240V, 50/60 Hz auto ranging
50/60 Hz, 100-240 VAC; 400 Hz, 100-120 VAC
120 W max
100-240 V, 50/60 Hz
2+ hours between charges, battery-low indicator at 20%
Battery capacity after repeated charging: 80% after 300 cycles
Non-operating temperature: –20 °C to 60 °C
Operating temperature: 0 °C to 50 °C
Power consumption is 67-75 Watts with optional N5429A DC Power adapter
Operating -10 °C to +55 °C; non-operating –40 °C to +70 °C
Operating 95% RH at 40 °C for 24 hr; non-operating 90% RH at 65 °C for 24 hr
Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)
Agilent class B1 and MIL-PRF-28800F; class 3 random
Agilent class B1 and MIL-PRF-28800F; class 3 random; (operating 30g, 1/2 sine,
11 ms duration, 3 shocks/axis along major axis, total of 18 shocks)
Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
Rated for indoor use only
CAT I
Regulatory information
Canada: CSA C22.2 No. 1010.1:1992
UL 61010B-1:2003
The product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly.
The product was tested in a typical configuration with HP/Agilent test systems.
0 to 5 V into high impedance
0 to 2.5 V into 50 Ω
0 to 580 mV into high impedance
0 to 290 mV into 50 Ω
(continued)
125 MHz (in source frequency/8 mode when terminated in 50 Ω)
Safety IEC 61010-1:2001 / EN 61010-1:2001