SNAP-HD-BF1 OPTO 22, SNAP-HD-BF1 Datasheet - Page 12

• Manufacturer Part Number: SNAP-HD-BF1
• Description: 40T0071
• Manufacturer: OPTO 22

Specifications of SNAP-HD-BF1

• Length: 14.5"
• Accessory Type: Header Cable

PAGE
12
Pinouts and Wiring (continued)
Connector Wiring—SNAP 16-Point Digital Modules
The following diagram shows16-channel module connector
wiring for the SNAP-HD-ACF6 wiring harness. Applies to
SNAP-IDC-16, SNAP-IDC-HT-16, SNAP-IAC-16, SNAP-IAC-A-16,
and SNAP-IAC-K-16 high-density digital modules.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Port for OptoTerminal-G20
SNAP High-Density Digital I/O Modules
Top View of Module
NOTE: The small four-pin connector on the top of a 16-point
module connects to the optional OptoTerminal-G20 using a
special adapter cable, included with the OptoTerminal.
Building Your Own Wiring Harness for a
16-channel Module
To build your own wiring harness similar to the SNAP-HD-
ACF6, you will need the following parts:
Connector: Molex 39-01-2165
Pins: Molex 39-00-0214
Cable: Belden 8308 (22 AWG, 16 conductor, shielded) or
equivalent (UL AWM style 2464)