SAF7118EH/V1/G,518 Trident Microsystems, Inc., SAF7118EH/V1/G,518 Datasheet - Page 163

• Manufacturer Part Number: SAF7118EH/V1/G,518
• Manufacturer: Trident Microsystems, Inc.

Specifications of SAF7118EH/V1/G,518

• Lead Free Status / Rohs Status: Supplier Unconfirmed

NXP Semiconductors
SAF7118_4
Product data sheet
18.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 149. SnPb eutectic process (from J-STD-020C)
Table 150. Lead-free process (from J-STD-020C)
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 149
and
Figure
150
98.
Rev. 04 — 4 July 2008
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
Multistandard video decoder with adaptive comb filter
3
3
)
)
Figure
350 to 2000
260
250
245
98) than a SnPb process, thus
220
220
350
> 2000
260
245
245
SAF7118
© NXP B.V. 2008. All rights reserved.
163 of 175