IQ81348SC.KIT 889150 Intel, IQ81348SC.KIT 889150 Datasheet - Page 9

• Manufacturer Part Number: IQ81348SC.KIT 889150
• Manufacturer: Intel

Specifications of IQ81348SC.KIT 889150

• Lead Free Status / Rohs Status: Supplier Unconfirmed

EXPANSION
PCI: 33 MHz or 66 MHz; miniPCI connector.
CompactFlash* (CF) port can be used for
ROM expansion.
One 64-bit PCI-X connector – 33 MHz.
CompactFlash* (CF) port can be used for
ROM expansion.
One 64-bit PCI-X connector – 33 MHz: on top
edge of board. The Intel® 8545EM Gigabit
Ethernet Controller is also on this bus.
Peripheral Bus Header: PC04-like 0. header
for logic analyzer probing or peripheral bus
prototyping.
One 64-bit PCI-X connector – 33 MHz: on top
edge of board.
One 64-bit 00 MHz PCI-X slot. This is a right
angle slot mounted on the back (non-compo-
nent) side of the board. The Intel® 8545EM
Gigabit Ethernet Controller is also on this 00
MHz PCI bus.
Peripheral Bus Header: PC04-like 0. header
for logic analyzer probing or peripheral bus
prototyping.
INDICATORS
Four hard drive activity LEDs.
LAN link and speed/activity LEDs.
Power and Alarm LED.
Two 7-segment Hex LED displays.
Audio buzzer.
Power and Alarm LED headers.
Header for external hard drive activity LEDs.
Two 7-segment Hex LED displays.
Audio buzzer.
Power and Alarm LEDs.
Two 7-segment Hex LED displays.
Audio buzzer.
Power and Alarm LEDs.
PERIPHERALS
Serial temperature and thermal.
I
Battery-backed Serial RTC on I
with replaceable battery.
RTC on I
Temperature sensor on I
Support for “RAID” Implementation – Ability
to make the devices plugged in the secondary
expansion slots “Private” .
Integrated XOR engine and two iSCSI CRC3C
offload engines.
Battery Present, Charge Level, and Battery
Backup Enable is provided by an on-board CPLD.
Support for “RAID” Implementation – Ability
to make the devices plugged in the secondary
expansion slots “Private” .
Integrated XOR engine and two iSCSI CRC3C
offload engines.
Battery Present, Charge Level, and Battery
Backup Enable is provided by an on-board CPLD.

C monitor.

C bus with replaceable battery.

C bus.

C bus,
POWER/MOTHERBRD. CONN.
5-Volt supply: The board ships with a +5 V, 4A
PSU unit, This can also be used to supply power
to a .5-inch laptop SATA drive, typically A.
An external ATX power supply should be used
whenever this board is used with more than
one +5 V drive, with any drive requiring + V,
or when control of primary power by PIC
is required.
N/A.
The IQ809 development kit is intended for
developing external storage applications and is
shipped in a standard ATX case with an included
300 W power supply that is sized to drive at
least four SATA drives.
N/A.
This board sources 3.3 V power from the
PCI-X motherboard connector. There is also
an auxiliary power receptacle that is used
to power the secondary PCI-X slot. This
connector is compatible with a standard
ATX hard drive power connector.
Primary PCI-X Bus (.33 MHz).
This board sources 3.3 V power from the
PCIe motherboard connector. There is also
an auxiliary power receptacle that is used
to power the secondary PCI-X slot. This
connector is compatible with a standard
ATX hard drive power connector.
PCle x8 lane.
9