ADG507AKN Analog Devices Inc, ADG507AKN Datasheet - Page 7

• Manufacturer Part Number: ADG507AKN
• Description: IC MULTIPLEXER DUAL 8X1 28DIP
• Manufacturer: Analog Devices Inc
• Type: Analog Multiplexerr

Specifications of ADG507AKN

• Mounting Type: Through Hole
• Rohs Status: RoHS non-compliant
• Function: Multiplexer
• Circuit: 2 x 8:1
• On-state Resistance: 700 Ohm
• Voltage Supply Source: Dual Supply
• Voltage - Supply, Single/dual (±): ±10.8 V ~ 16.5 V
• Current - Supply: 20µA
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• No. Of Channels: 8
• Analog Switch Case Style: DIP
• No. Of Pins: 28
• Single Supply Voltage Min (+v): 10.8V
• Analog Multiplexer Type: Differential
• Peak Reflow Compatible (260 C): No
• Package: 28PDIP W
• Maximum On Resistance: 700@16.5V Ohm
• Maximum Propagation Delay Bus To Bus: 300@±16.5V|450@16.5V ns
• Maximum High Level Output Current: 20 mA
• Multiplexer Architecture: 8:1
• Number Of Channels Per Chip: 1
• Maximum Turn-on Time: 450@16.5V ns
• Power Supply Type: Single|Dual
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SINGLE SUPPLY AUTOMOTIVE APPLICATION
The excellent performance of the multiplexers under single
supply conditions makes the ADG506A/ADG507A suitable in
applications such as automotive and disc drives where only
positive power supply voltages are normally available. The fol-
lowing application circuit shows the ADG507A connected as an
8-channel differential multiplexer in an automotive, data acqui-
sition application circuit.
REV. C
Figure 7. ADG507A in a Single Supply Automotive Data Acquisition Application
Test Circuit 8. Enable Delay, t
Test Circuit 9. Charge Injection
–7–
The AD7580 is a 10-bit successive approximation ADC, which
has an on-chip sample-hold amplifier and provides a conversion
result in 20 s. The ADC has differential analog inputs and is
configured in the application circuit for a span of 2.5 V over a
common-mode range 0 V to + 5 V. Wider common-mode ranges
can be accommodated. See the AD7579/AD7580 data sheet for
more details. The complete system operates from +12 V (+10%)
and +5 V supplies. The analog input signals to the ADG507A
contain information such as temperature, pressure, speed etc.
ON
(EN), t
OFF
(EN)
ADG506A/ADG507A