FLUKE-190-204/AM/S Fluke Electronics, FLUKE-190-204/AM/S Datasheet - Page 55

• Manufacturer Part Number: FLUKE-190-204/AM/S
• Description: SCOPEMETER 4CH 200MHZ COLOR SCC
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-204/AM/S

• Bandwidth: 200MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 1.7nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1175

Using Triggering to Start or Stop Scope Record
To record an electrical event that causes a fault, it might
be useful to start or stop recording on a trigger signal:
Start on trigger to start recording; recording stops when
the deep memory is full
Stop on trigger to stop recording.
Stop when untriggered to continue recording as long as
a next trigger comes within 1 division in view all mode.
For the models 190-xx4 the signal on the BNC input that
has been selected as trigger source must cause the
trigger.
For the models 190-xx2 the signal applied to the banana
jack inputs (
trigger. The trigger source is automatically set to
(external).
To set up the test tool, continue from step 3 of the
previous section:
4
5
Apply the signal to be recorded to the BNC
input(s).
F1
EXT TRIGGER (in)
Stop recording to unlock the
OPTIONS… softkey
). signal must cause the
Ext.
Recording Scope Waveforms In Deep Memory (Scope Record)
For external triggering (190-xx2) continue at step 9.
6
7
8
F2
ENTER
ENTER
Open the
menu.
Jump to the Mode: field, select
on Trigger… (models 190-xx4) or
on Ext. (models 190-xx2) to open
the
TRIGGERING
SWEEP ON EXT
Select one of the Conditions:
and accept the selection.
START SINGLE SWEEP ON
RECORDER OPTIONS
or the
. menu.
START SINGLE
47