IQ81342MC.KIT Intel, IQ81342MC.KIT Datasheet - Page 5

• Manufacturer Part Number: IQ81342MC.KIT
• Manufacturer: Intel

Specifications of IQ81342MC.KIT

• Lead Free Status / Rohs Status: Supplier Unconfirmed

EXPANSION
One 64-Bit PCI-X slot.
00 MHz (the ethernet controller is on this
same bus).
One x8 PCI express slot.
CF slot can be used for ROM expansion.
One 64-Bit PCI-X slot.
00 MHz (the ethernet controller is on this
same bus).
One 64-bit PCI-X connector – 33 MHz: on top
edge of board. The Intel® 8545EM Gigabit
Ethernet Controller is also on this bus.
Peripheral Bus Header: PC04-like 0. header
for logic analyzer probing or peripheral bus
prototyping.
One 64-bit PCI-X connector – 33 MHz: on top
edge of board.
One 64-bit 00 MHz PCI-X slot. This is a right
angle slot mounted on the back (non-compo-
nent) side of the board. The Intel® 8545EM
Gigabit Ethernet Controller is also on this 00
MHz PCI bus.
Peripheral Bus Header: PC04-like 0. header
for logic analyzer probing or peripheral bus
prototyping.
INDICATORS
Two 7 Segment Hex display.
Power LED.
Buzzer.
Two 7 segment Hex display.
8 status LED.
Buzzer.
Two 7-segment Hex LED displays.
Audio buzzer.
Power and Alarm LEDs.
Two 7-segment Hex LED displays.
Audio buzzer.
Power and Alarm LEDs.
PERIPHERALS
Temp Sensor.
4 I
Real Time Clock with Battery.
Temp Sensor.
Support for “RAID” Implementation – Ability
to make the devices plugged in the secondary
expansion slots “Private” .
Integrated XOR engine and two iSCSI CRC3C
offload engines.
Battery Present, Charge Level, and Battery
Backup Enable is provided by an on-board CPLD.
Support for “RAID” Implementation – Ability
to make the devices plugged in the secondary
expansion slots “Private” .
Integrated XOR engine and two iSCSI CRC3C
offload engines.
Battery Present, Charge Level, and Battery
Backup Enable is provided by an on-board CPLD.

C Fan monitor/controllers.
POWER/MOTHERBRD. CONN.
MicroATX 7.5 inch x 9.0 inch (90 mm x
30 mm).
0 Pin Standard ATX.
Full Size PCIe 5.75 inch x .5 inch (45 mm
x 30 mm).
This board sources power from the x8 lane PCIe
motherboard connector.
4 Pin Molex HDD connector for power to the
PCI-X slot.
This board sources 3.3 V power from the
PCI-X motherboard connector. There is also
an auxiliary power receptacle that is used
to power the secondary PCI-X slot. This
connector is compatible with a standard
ATX hard drive power connector.
Primary PCI-X Bus (.33 MHz).
This board sources 3.3 V power from the
PCIe motherboard connector. There is also
an auxiliary power receptacle that is used
to power the secondary PCI-X slot. This
connector is compatible with a standard
ATX hard drive power connector.
PCle x8 lane.
5