RPM7240-R Rohm Semiconductor, RPM7240-R Datasheet - Page 12
![RECEIVER REMOTE CTRL 40.0KHZ STR](/photos/40/15/401558/rpm7138-r_sml.jpg)
RPM7240-R
Manufacturer Part Number
RPM7240-R
Description
RECEIVER REMOTE CTRL 40.0KHZ STR
Manufacturer
Rohm Semiconductor
Specifications of RPM7240-R
Sensing Distance
15m
B.p.f. Center Frequency
40.0kHz
Voltage - Supply
2.7 V ~ 3.6 V
Current - Supply
500µA
Orientation
Side View
Mounting Type
Through Hole
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
2. Remote Control Receiver Module and Data Communication
1) Structure of Remote Control Receiver Module
2) Remote Control System Signal Flow
Condenser lens
(1)
The Remote Control Receiver Module receives an optical signal from the Remote Control Unit
and changes the signal into an electric signal.
Fig. 3 Structure of RPM7100-Hx/RPM7200-Hx
Electric signal generation
Power-ON code
Remote Control Unit
(1)
Holder casing
Press the Power
Basic Knowledge of Remote Control/Remote Control Receiver Module and Data Communication
ON button.
Mold resin
Infrared
LED
Lead frame
Photodiode
Signal processing IC
(2)
Receiver Module
Remote Control
Electric signal
(
10
RPM7100-Hx
RPM7200-Hx
The photodiode and the signal processing IC
are die-bonded to the metal lead frame. Then
gold wires are bonded for necessary wiring.
The parts are sealed with mold resin to shut
off visible optical noise, and the whole
structure except the condenser lens is covered
with a metal shield casing.
)
LED turns ON (lit) at high level
(3)
Optical signal
Subcarrier
Microcontroller
(Ex. 36.7Hz, 38kHz, 40kHz)
The Power-ON code
signal is mixed with
the subcarrier.
Instructions to
electrical set