RN-XV Roving Networks Inc, RN-XV Datasheet - Page 6

no-image

RN-XV

Manufacturer Part Number
RN-XV
Description
MODULE 802.11B/G 2.4GHZ
Manufacturer
Roving Networks Inc
Series
-r
Datasheets

Specifications of RN-XV

Frequency
2.4GHz
Data Rate - Maximum
54Mbps
Modulation Or Protocol
802.11b/g
Applications
General Purpose
Power - Output
12dBm
Sensitivity
-83dBm
Voltage - Supply
3 V ~ 3.7 V
Current - Receiving
40mA
Current - Transmitting
180mA
Data Interface
PCB, Through Hole
Memory Size
-
Antenna Connector
On-Board, Wire Antenna
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
740-1044
RN-XV-W
RN-XVEE
XVEE
Design Concerns
Ordering Information
Roving Networks reserves the right to make corrections, modifications, and other changes to its products,
documentation and services at any time. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete.
Roving Networks assumes no liability for applications assistance or customer product design. Customers are
responsible for their products and applications using Roving Networks components. To minimize the risks associated
with customer products and applications, customers should provide adequate design and operating safeguards.
Roving Networks products are not authorized for use in safety-critical applications (such as life support) where a
failure of the Roving Networks product would reasonably be expected to cause severe personal injury or death,
unless officers of the parties have executed an agreement specifically governing such use.
All other trademarks are property of their respective owners.
1. Powering the RN-XV module: Apply ONLY 3.3V±10% regulated power to pin 1 (VDD) and pin 10 (Ground).
2. Antenna: The RN-XV ships with a wire antenna. Custom antenna configurations such as chip, U.FL. and
Part Number
RN-XV-U*
RN-XV-C*
RN-XV-W
RN-XV-S*
www.rovingnetworks.com
The module does not have any voltage regulator on board and hence MUST be powered from a regulated
3.3V power supply.
SMA connector are available with extended lead times
809 University Avenue
*For these configurations, contact Roving Networks directly at info@rovingnetworks.com
Standard configuration, industrial Temperature (- 40 to + 85 C) 802.15.4 replacement
solution with wire antenna
Custom configuration, industrial Temperature (- 40 to + 85 C) 802.15.4 replacement solution
with U.FL. connector
Custom configuration, industrial Temperature (- 40 to + 85 C) 802.15.4 replacement solution
with SMA connector
Custom configuration, industrial Temperature (- 40 to + 85 C) 802.15.4 replacement solution
with chip antenna
Copyright © 2011 Roving Networks. All rights reserved.
Los Gatos, CA 95032
~ page 6 ~
Tel (408) 395-6539
RN-XV Data Sheet (Preliminary)
Description
• info@RovingNetworks.com
RN-XV-DS v0.1 6/2/2011

Related parts for RN-XV