ADG1211YRUZ Analog Devices Inc, ADG1211YRUZ Datasheet - Page 8

• Manufacturer Part Number: ADG1211YRUZ
• Description: IC SWITCH QUAD SPST 16TSSOP
• Manufacturer: Analog Devices Inc
• Series: iCMOS®r
• Type: Analog Switchr

Specifications of ADG1211YRUZ

• Design Resources: Sample-and-Hold Circuit Using ADG1211 Switch (CN0058)
• Function: Switch
• Circuit: 4 x SPST - NO
• On-state Resistance: 260 Ohm
• Voltage Supply Source: Single, Dual Supply
• Voltage - Supply, Single/dual (±): 10.8 V ~ 13.2 V, ±15 V
• Current - Supply: 1µA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP (0.173", 4.40mm Width)
• Analog Switch Type: SPST
• No. Of Channels: 4
• Bandwidth: 1GHz
• On State Resistance Max: 120ohm
• Turn Off Time: 40ns
• Turn On Time: 105ns
• Supply Voltage Range: 10.8V To 13.2V
• Multiplexer Configuration: Quad SPST
• Number Of Inputs: 4
• Number Of Outputs: 4
• Number Of Channels: 4
• Analog Switch On Resistance: 475@10.8VOhm
• Analog Switch Turn On Time: 155ns
• Analog Switch Turn Off Time: 65ns
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (typ): 12V
• Dual Supply Voltage (typ): ±15V
• Power Dissipation: 0.00000003W
• Supply Current: 0.32mA
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADG1211/ADG1212/ADG1213
TERMINOLOGY
I
The positive supply current.
I
The negative supply current.
V
The analog voltage on Terminals D and S.
R
The ohmic resistance between D and S.
R
Flatness is defined as the difference between the maximum and
minimum value of on resistance, as measured over the specified
analog signal range.
I
The source leakage current with the switch off.
I
The drain leakage current with the switch off.
I
The channel leakage current with the switch on.
V
The maximum input voltage for Logic 0.
V
The minimum input voltage for Logic 1.
I
The input current of the digital input.
C
The off switch source capacitance, measured with reference
to ground.
C
The off switch drain capacitance, measured with reference
to ground.
DD
SS
S
D
D
INL
ON
FLAT(ON)
S
D
D
INL
INH
, I
(Off)
(Off)
(Off)
(V
(Off)
(I
S
(On)
INH
S
)
)
Rev. A | Page 8 of 16
C
The on switch capacitance, measured with reference to ground.
C
The digital input capacitance.
t
The delay between applying the digital control input and the
output switching on. See Figure 23.
t
The delay between applying the digital control input and the
output switching off. See Figure 23.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
ON
OFF
D
IN
, C
S
(On)