MY4Z-AC110/120-EL Omron, MY4Z-AC110/120-EL Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
MY4Z-AC110/120-EL
Manufacturer Part Number
MY4Z-AC110/120-EL
Description
RELAY GP 4PDT 110/120VAC
Manufacturer
Omron
Series
MYr
Datasheet
1.MY4-AC12-EL.pdf
(20 pages)
Specifications of MY4Z-AC110/120-EL
Relay Type
General Purpose
Contact Form
4PDT (4 Form C)
Contact Rating (current)
3A
Switching Voltage
250VAC, 125VDC - Max
Coil Type
Non Latching
Coil Current
8.4mA
Coil Voltage
120VAC
Turn On Voltage (max)
96 VAC
Turn Off Voltage (min)
36 VAC
Features
-
Mounting Type
Socketable
Termination Style
Plug In
Contact Material
Silver (Ag)
Operate Time
20ms
Release Time
20ms
Coil Power
1.1 VA
Coil Resistance
4.43K Ohms
Operating Temperature
-55°C ~ 70°C
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
MY4ZAC110120EL
■ Precautions
Precautions for Connection
• Do not move the screwdriver up, down, or from side to side while it
• Do not insert the screwdriver at an angle. Doing so may break the
• Do not insert two or more wires in the hole. Wires may come in con-
• Insert the screwdriver along the hole wall as shown below.
• If lubricating liquid, such as oil, is present on the tip of screwdriver,
• Insert the screwdriver into the bottom of the hole. It may not be pos-
276
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the coil spring or cracks in the
housing) or cause deterioration of insulation.
side of socket and result in a short-circuit.
tact with the spring causing a temperature rise or be subject to
sparks. (There are two wiring holes for each terminal.)
the screwdriver may fall out resulting in injury to the operator.
sible to connect cables properly if the screwdriver is inserted incor-
rectly.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
General-purpose Relay
Screwdriver
MY
General Precautions
• Use the clip to prevent relays floating or falling out of the socket.
• Do not use the product if it has been dropped on the ground. Drop-
• Confirm that the socket is securely attached to the mounting track
• Ensure that the socket is not charged during wiring and mainte-
• Do not pour water or cleansing agents on the product. Doing so
• Do not use the socket in locations subject to solvents or alkaline
• Do not use the socket in locations subject to ultraviolet light (e.g.,
• Do not dispose of the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of screw-
driver in the fixture rail, and move it in the direction shown below.
ping the product may adversely affect performance.
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
nance. Not doing so may result in electric shock.
may result in electric shock.
chemicals.
direct sunlight). Doing so may result in markings fading, rust, corro-
sion, or resin deterioration.
Screwdriver
Fixture rail