SP5004EGP Xeltek, SP5004EGP Datasheet - Page 18

• Manufacturer Part Number: SP5004EGP
• Description: SUPERPRO 5004EGP PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: Gang-Universal Programmerr

Specifications of SP5004EGP

• Contents: Programmer, AC Adapter, Cable, CD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: EEPROM, EPROM, FLASH, MCU, NVRAM, PLD
• Other names: 415-1051

Hardware and Driver Installation
If you connect the hardware before installing the software, the system opens the
Found New Hardware Wizard, illustrated below.
1. Select Cancel to make sure the system does not install the wrong driver.
2. Return to the Software Setup process to setup the software before installing the
hardware. Refer to page 11 for instructions.
After you set up the software, you can install the hardware and driver. The
following procedure explains the installation process.
1. Make sure all other programs are closed during the installation process.
2. Connect the programmer module to the computer through the USB port.
3. Turn on the power switch of the programmer module.
Superpro
®
5004GP User’s Guide
18