ADG636YRUZ Analog Devices Inc, ADG636YRUZ Datasheet - Page 15

• Manufacturer Part Number: ADG636YRUZ
• Description: IC SWITCH DUAL SPDT 14TSSOP
• Manufacturer: Analog Devices Inc
• Type: Analog Switchr

Specifications of ADG636YRUZ

• Function: Switch
• Circuit: 2 x SPDT
• On-state Resistance: 115 Ohm
• Voltage Supply Source: Dual Supply
• Voltage - Supply, Single/dual (±): ±2.7 V ~ 5.5 V
• Current - Supply: 0.001µA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 14-TSSOP (0.173", 4.40mm Width)
• Analog Switch Type: SPDT
• No. Of Channels: 2
• Bandwidth: 610MHz
• On State Resistance Max: 115ohm
• Turn Off Time: 55ns
• Turn On Time: 100ns
• Supply Voltage Range: ± 2.7V To ± 5.5V
• Multiplexer Configuration: Dual SPDT
• Number Of Inputs: 2
• Number Of Outputs: 4
• Number Of Channels: 2
• Analog Switch On Resistance: 380Ohm
• Analog Switch Turn On Time: 360ns
• Analog Switch Turn Off Time: 175ns
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (typ): 3/5V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): ±2.7V
• Dual Supply Voltage (typ): ±3/±5V
• Dual Supply Voltage (max): ±5.5V
• Power Dissipation: 0.00001W
• Supply Current: 0.001mA
• Mounting: Surface Mount
• Pin Count: 14
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TERMINOLOGY
V
Most positive supply potential.
V
Most negative power supply in a dual-supply application.
In single-supply applications, this should be tied to ground at
the device.
GND
Ground (0 V) reference.
I
Positive supply current.
I
Negative supply current.
S
Source terminal. May be an input or output.
D
Drain terminal. May be an input or output.
R
Ohmic resistance between Terminal D and Terminal S.
ΔR
On resistance match between any two channels (that is,
R
R
Flatness is defined as the difference between the maximum and
minimum values of on resistance as measured over the specified
analog signal range.
I
Source leakage current with the switch off.
I
Drain leakage current with the switch off.
I
Channel leakage current with the switch on.
V
Analog voltage on Terminal D and Terminal S.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
DD
SS
S
D
D
ON
ON
FLAT(ON)
DD
SS
D
INL
INH
(Off)
(Off)
(On), I
, V
ON
max − R
S
S
(On)
ON
min).
Rev. B | Page 15 of 16
I
Input current of the digital input.
C
Channel input capacitance for the off condition.
C
Channel output capacitance for the off condition.
C
On switch capacitance.
C
Digital input capacitance.
t
Delay time between the 50% and 90% points of the digital input
and the switch on condition.
t
Delay time between the 50% and 90% points of the digital input
and the switch off condition.
t
Delay time between the 50% and 90% points of the digital input
and the switch on condition when switching from one address
state to another.
t
Off time or on time measured between the 80% points of both
switches when switching from one address state to another.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Bandwidth
The frequency response of the on switch.
Insertion Loss
Loss due to the on resistance of the switch.
INL(IINH)
ON
OFF
TRANSITION
BBM
S
D
D
IN
(Off)
(Off)
(On), C
(EN)
(EN)
S
(On)
ADG636