15-21-S2SC-H6D9K2L2A0A-2T8-AM Everlight Electronics Co Ltd, 15-21-S2SC-H6D9K2L2A0A-2T8-AM Datasheet - Page 13

• Manufacturer Part Number: 15-21-S2SC-H6D9K2L2A0A-2T8-AM
• Description: LED BRILLIANT ORANGE CLEAR 1206
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 15-21-S2SC-H6D9K2L2A0A-2T8-AM

• Lead Free Status / Rohs Status: Lead free by exemption / RoHS Compliant

Technical Data Sheet
1206 Package Chip LED
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
2. Current limiting
3. Storage
4. Iron Soldering
5. Usage
Application Restrictions
1. High reliability applications such as military/aerospace, automotive safety/security systems, and
Everlight Electronics Co., Ltd.
Device No. DSA-151-001
A resistor should be used to limit current spikes that can be caused by voltage fluctuations.
Otherwise damage could occur.
3.1 Moisture proof bag should only be opened immediately prior to usage.
3.2 Environment should be less than 30
3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be
3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component
Hand soldering is not recommended for regular production. These guidelines are for rework only.
Soldering iron tip should contact each terminal no more than 3 sec at 350 , using soldering iron
with nominal power less than 25W. Allow min. 2 sec. between soldering intervals.
Do not exceed the values given in this specification.
medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
(B) Recommend soldering pad
exceeded.
should be baked at min. 60deg +/-5deg for 25 hours.
EVERLIGHT ELECTRONICS CO., LTD.
http://www.everlight.com
Prepared date: 29-July-2008
and 90% RH when moisture proof bag is opened.
15-21-S2SC-H6D9K2L2A0A-2T8-AM
Rev. 1
Created by: Eddie Wang
Page: 13 of
13