15-21SYGC/S530-E2/TR8 Everlight Electronics Co Ltd, 15-21SYGC/S530-E2/TR8 Datasheet - Page 9

• Manufacturer Part Number: 15-21SYGC/S530-E2/TR8
• Description: LED BRILLIANT YLW/GRN CLEAR 1206
• Manufacturer: Everlight Electronics Co Ltd
• Type: Uni-Colorr

Specifications of 15-21SYGC/S530-E2/TR8

• Package Type: Chip Led
• Emitting Color: Yellow Green
• Luminous Intensity: 21mcd
• Test Current (it): 20mA
• Forward Current: 25mA
• Dominant Wave Length: 573nm
• Viewing Angle: 130°
• Forward Voltage: 2.4V
• Product Length (mm): 3.2mm
• Product Height (mm): 1.1mm
• Product Depth (mm): 1.5mm
• Mounting: Surface Mount
• Peak Wavelength: 575nm
• Shape Type: Rectangular
• Chip Material: AlGaInP
• Main Category: Chip LED
• Number Of Elements: 1
• Pin Count: 2
• Operating Temperature Classification: Industrial
• Lens Type: Colorless Non Diffused
• Operating Temp Range: -40C to 85C
• Reverse Voltage: 5V
• Power Dissipation: 60mW
• Lens Dimensions: 2x1.5x0.5mm
• Lead Free Status / Rohs Status: Lead free by exemption / RoHS Compliant

4.Soldering Iron
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd.
Device No:DSE-151-066
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
EVERLIGHT ELECTRONICS CO.,LTD.
http://www.everlight.com
Prepared date:7-Apr -2009
Tel: [phone]
Fax: [phone]
http://www.everlight.com
15-21SYGC/S530-E2/TR8
Prepared by: Huang yongxin
Rev 2
Page: 9 of 9