11-21UYC/S530-A3/TR8 Everlight Electronics Co Ltd, 11-21UYC/S530-A3/TR8 Datasheet - Page 8
![no-image](/images/manufacturer_photos/0/2/240/everlight_electronics_co_ltd_sml.jpg)
11-21UYC/S530-A3/TR8
Manufacturer Part Number
11-21UYC/S530-A3/TR8
Description
LED A1GAINP YLW INNER LENS 1206
Manufacturer
Everlight Electronics Co Ltd
Datasheets
1.11-21UYCS530-A3TR8.pdf
(9 pages)
2.11-21UYCS530-A3TR8.pdf
(9 pages)
3.11-21UYCS530-A3TR8.pdf
(9 pages)
Specifications of 11-21UYC/S530-A3/TR8
Lead Free Status / Rohs Status
Vendor undefined / RoHS Compliant
Precautions For Use
1. Over-current-proof
2. Storage
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
Device No:SZDSE-111-007
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
EVERLIGHT ELECTRONICS CO.,LTD.
http://www.everlight.com
Prepared date: 17-Aug-2005
11-21UYC/S530-XX/TR8
Rev.1
Prepared by: Meng Yali
Page: 8 of 9