61-238/KK2C-S30306F4GB2/ET Everlight Electronics Co Ltd, 61-238/KK2C-S30306F4GB2/ET Datasheet - Page 13
![no-image](/images/manufacturer_photos/0/2/240/everlight_electronics_co_ltd_sml.jpg)
61-238/KK2C-S30306F4GB2/ET
Manufacturer Part Number
61-238/KK2C-S30306F4GB2/ET
Description
LED LOW POWER 0.2A 6PLCC
Manufacturer
Everlight Electronics Co Ltd
Datasheet
1.61-238KK2C-S30306F4GB2ET.pdf
(14 pages)
Specifications of 61-238/KK2C-S30306F4GB2/ET
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
1080-1217-2
61-238/XK2C-SXXXXXXXXXX/ET
Precautions for Use
13
DATASHEET
SMD Low Power LED
1. Over-current-proof
2. Storage
3. Soldering Condition
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.1 Pb-free solder temperature profile
3.4 After soldering, do not warp the circuit board.
Copyright © 2010, Everlight All Rights Reserved. Release Date : 06-Apr.-2011. Issue No: v1
Device No: DSE-000
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current
change (Burn out will happen).
less. If unused LEDs remain, it should be stored in moisture proof packages.
time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5℃ for 24 hours.
Pre-heating
150~200°C
60~120sec.
3°C/sec.Max.
30sec.Max.
Above255°C
Above 217°C
60~150sec.
10sec. Max.
260°C Max.
6°C/sec.Max.
www.everlight.com