1586496-8 TE Connectivity, 1586496-8 Datasheet - Page 3

• Manufacturer Part Number: 1586496-8
• Description: Headers & Wire Housings 08P DUAC 94V0 W0/PEG WO/DH LF
• Manufacturer: TE Connectivity
• Series: Amp Duac Seriesr

Specifications of 1586496-8

• Product Type: Headers - Shrouded
• Connector Line: AMP-DUAC
• Connector Type: Header
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Flange: Without
• Voltage (vac): 600
• Current Rating (a): 9
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Signal Positions: 8
• Positions Unloaded: None
• Centerline (mm [in]): 4.20 [0.165]
• Mount Type: Printed Circuit Board
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Material (signal): Copper Alloy
• Solder Process Drain Hole: Without
• Connector Style: Plug
• Ul Flammability Rating: UL 94V-0
• Housing Color: White
• Housing Material: Nylon
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• High Temperature Header: No
• Lead Free Status / Rohs Status: Details

Rev B
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
0.5 Newton [0.11 pound] average
per contact minimum.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-42,
Condition A.
Measure force necessary to
unmate samples with locking
latches disengaged at a maximum
rate of 12.7 mm [0.5 inch] per
minute.
TE Spec 109-22.
Subject unmated samples to 5
cycles between -55 and 105° C.
TE Spec 109-23-3,
Condition B.
Subject mated and unmated
samples to 10 cycles between 25
and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 500
hours.
Procedure
108-1699
3 of 6